Articulated Snake!!! Print in Place, No Supports;)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated model of snake
- Ocena
- 4,667 / 5
- Polubienia
- 525
- Pobrania
- 3286
- Wydruki
- 12
- Wyświetlenia
- 11 673
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives

Printed it with 100% size with PLA Green/Black Magic Silk from Rosa3d
Also printed 80% size with PET-G Glassy from Spectrum.
Both were printed on P1S 0.4 nozzle, 0,2 layer height.
I didn't have any problems with parts sticking to other parts (after a few tests of course ;) )
Snake moves smoothly right after printing.
NO SUPPORTS are needed ;)
I didn't use brim and print turned out just great. If you like it please share your make ;)
Update
I printed two more snakes to test if there is an any issue. There was no problem printing either off them. 150% scale in X and Y and 120% in Z (looks more real to me in that scale). The tiny one was 50% in XY and 40% in Z.
Have a nice day!!!
If you like my designs and want to support me or sell physical figures, you can join my Patreon.
patreon.com/TomCustoms
