Articulated Snake!!! Print in Place, No Supports;)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Articulated model of snake
- Rating
- 4.667 / 5
- Likes
- 526
- Downloads
- 3,288
- Makes
- 12
- Views
- 11,686
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives

Printed it with 100% size with PLA Green/Black Magic Silk from Rosa3d
Also printed 80% size with PET-G Glassy from Spectrum.
Both were printed on P1S 0.4 nozzle, 0,2 layer height.
I didn't have any problems with parts sticking to other parts (after a few tests of course ;) )
Snake moves smoothly right after printing.
NO SUPPORTS are needed ;)
I didn't use brim and print turned out just great. If you like it please share your make ;)
Update
I printed two more snakes to test if there is an any issue. There was no problem printing either off them. 150% scale in X and Y and 120% in Z (looks more real to me in that scale). The tiny one was 50% in XY and 40% in Z.
Have a nice day!!!
If you like my designs and want to support me or sell physical figures, you can join my Patreon.
patreon.com/TomCustoms
