Skadis hotend holder & drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hotend holder for IKEA Skadis Pegboard. With drawer and replaceable signs for nozzle size. Bambu Lab X and P series .
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hotend holder for IKEA Skadis.
This is a hotend holder for the Skadis pegboard (can be used standing on a desk as well) with an extra drawer for small stuff.
Drop in
Hotends/nozzles drop in place. The holes are made big enough to accommodate nozzles complete with heaters and clips.
Replaceable signs
Complete with signs that slide on a dovetail joint so you can label what size nozzle you have in each holder.
The text on the signs are embossed 0,8mm so you can color it by layer and cut down on filament changes.
Drawer
Complete with a drawer to keep all the screws, clips, silicone socks etc.
Dovetail joint
This piece is split by a snap in place dovetail joint to be able to be printed more easily. This joint is not made to come apart after assembly and might need some force to snap in place. You can of course use glue if you like but its not needed.
Pegs
The pegs on the back are also snap in and slide into place with a click.
Tight fit
The tolerances are small so be aware that if you are over-extruding too much you might have problems sliding the pieces together.
Print files as oriented.