3DPrintopia Bling Chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun model you can wear at 3DPrintopia showing off your 3DPrintopia pride!
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 2
- Wyświetlenia
- 308
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — NoDerivatives
Get ready for 3DPrintopia with some bling! The 3DPrintopia bling chain consists of a pendant and a chain link segment. Print multiple chain links and connect them for a long wearable chain necklace and show off your 3DPrintopia pride! NOTE: I do not own rights to 3DPrintopia logo. All logo rights belong to the event/organization and is used for entertainment purposes only. No remixes of the file or logo are allowed due to this.
I Recommend printing 3 chain links for desired length/look. Each chain link has each link on its ends with an open slot to connect easily to the pendent hooks and to additional chain links.
Print setting suggestions: Pendent can be printed with multiple colors (color swaps) on a single tool printer or and multi tool printer! Recommend slicing/painting alternating gems on the pendent to get the checkerboard look.
chain link has flat surface to adhere to bed. If having adhesion issues, I suggest a small brim around each link. light supports needed, especially on end links with open slot. 50% > infill recommended.