Liczymy pasujące modele…
This is my improved version of the classic Flexi Rex. Somehow this version became the most popular one, maybe just because it doesn't break easily when handled by kids (and adults of course). I uploaded this model to Printables for…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
Print-in-place chain link fidget toy - available in 4 sizes . Small (8 Links) - Ideal for one-handed use Medium (12 Links) - Good middle ground, useable in one or two hands (Recommended) Large (16 Links) - Great for use with two hands XL…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Found this on Hackaday years ago. It is a unique way to 3D print an object (Slinky style Magic Spring) which would otherwise be impossible to print in the traditional slicer toolchain. Since the Magic Spring is a coiled strand of plastic,…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Use this wall or ceiling mount to place your TP-Link Deco M5 out of the way in an elegant manner. This model works with TP-Link Deco M5 Accesspoint ( TP-Link Deco M5 Mesh WLAN AC1300 Dual Band Home Network Complete Solution White:…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
This is a 70 degree wedge for the Reolink POE Doorbell. It will work with the factory mounting plate. It may work with other doorbells as well. The inside could be cleaned up a bit but that won't be seen once mounted. Feel free to share,…
Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Wydruk około 4,09 €–5,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Organize your pruning shears using the Ryobi Link storage system. Print recommendations: Layer Height: 0.30mm Supports: None Infill: 0% Perimeters: 3 Filament: OVERTURE Grass Green PETG.
Wydruk około 3,25 €–3,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this adapter for mounting my tp-link Omada Controller OC200 in a server rack. The controller simply snaps into the printed frame without any additional screws or other fixture. For mounting small parts inside a 19'' rack I use…
Wydruk około 3,16 €–3,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
D-Link GO-SW-5E 100Mbps switch mount / holder.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🇫🇷 Français Titre : Starlink Gen 3 Tripod Pipe Mount Adapter 🛰 Description Cet adaptateur permet de fixer le Pipe Adapter officiel Starlink Gen 3 sur un trépied standard , offrant une solution stable, portable et polyvalente pour…
Wydruk około 4,85 €–5,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For a friend's wedding, I created original cufflinks that no one else will have that day. Some of the wedding guests were chosen to wear a secret MCU reference and I just couldn't find my old cufflinks at home. Hence this choice. For…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This print continues my exploration into 3D-printed fabrics — a grid of interlinked squares connected by small chain loops. The design creates a highly flexible surface that bends easily in any direction but naturally returns to its…
Wydruk około 6,12 €–7,47 € nettoWstępna wycena jednego wariantu
šablona k narýsování linek, výška 30mm
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
A chain link bracelet that you assemble yourself by snapping the links together. For me, 11 links made the perfect fit. Use 15mm per link as a guide and adjust the number of links according to your wrist size. A smaller version with 13mm…
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
I explored various models, but none met my angle and design standards. Therefore, I've created a new customizable design using Fusion 360 parameters. I designed this model keeping in mind the strength of the wedge and the space needed for…
Mounting hole template matches the paper one that comes with the doorbell and is an easy and quick print that is a bit more robust than the original one. I found that I needed a bit more spacing between the screw holes which are on the…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
Just a Reolink Doorbell Rain Cover. No Supports needed.
This mount allows you to install your Blink Doorbell at a 25 degree angle in a corner. There are 3 different sets of screw holes incase you need to offset the mouting if using existing holes. e.g for wiring.
Tilts Reolink doorbell 30 degrees right or left and 15 degrees up or down. Left/Right is from the perspective of the camera. If you want the camera tilted up instead of down, choose the opposite left/right direction. Update: Added v2 to…
I had been just double adhesive taping this thing and realized that since I had an actual working 3D printer I should probably design a mount. I made sure that it can accommodate fairly large USB flash drives and added another 2mm to the…
Bonjour, Je vous propose mon modèle de protection contre la pluie pour la sonnette Reolink Doorbell. J'y ai ajouté un “antivol” en y ajoutant une vis M2x4 à la base de la protection. Contenu: Une plaque murale avec insert pour la…
3D Model Of The Iconic Linked Sword On Roblox. Enjoy!!
By far one of my favorite eras for Link! I've learned a lot about organic / tree supports while trying to print this model. I have had issues with the sword, sheath, and cap using slicer generated tree supports. My suggestion is to add…
I needed a mount to get my Blink Sync Module 2 (cumbersome name) off my desk without mounting it to the wall. Everything I found was at an odd orientation and/or did not have a cutout for the USB memory module I added. I used this short,…
Needed some space between the Reolink Video Doorbell and the wall to hide extra ethernet cable. Use M4 screw + nut to fasten the metal holder to the spacer. Printed from PETG, with 25% infill. Fixed rain roof.
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
I needed I replacement mount for my TP-Link access point. It should fit other models as well. Printed at 0.2 mm layer height with PLA
-------------------------------------------------------------------------------------------------------- These are the current mounts: Horizontal: 5,10,15,20,25,30,35,40,45 Vertical: 5,10,15,20 Dual: 5 Vertical, 10 Horizontal Dual: 5…
I made a pretty silly contraption that does a pretty good job of moving something back and forth. It's an unpolished design that could use a lot of work, but by Jove, it functions. Here are all of the parts that I bought for it, and…
A simple wall mount Blink Sync 2 Module that easily screws to the wall. Print in PLA with general settings, requires supports.
What kind of model would you rather have as a bookmark? Classic ones are our favorite :D
8bit Pacman Ghosts are back… as fidget toys! Quick and easy to print, their compact size makes them perfect for on-the-go entertainment, while the magnetic design adds an element of tactile pleasure, enhancing the fidgeting experience.…
Wall mount for the new Blink Sync Module 2 that came with my Blink Outdoor (3rd Gen) camera. Included North American and European Outlets.
In search of a drag chain for the Creality 3D Ender 6 printer, this may be the one that does the job for you too. I looked for a few ready-made designs and printed a couple as well for testing. My findings were that they were intended for…
You can support me here:https://www.buymeacoffee.com/Pandalogy Print test on X1 Carbon with PLA+ Extruder Flow rate tested on:0.98, internal/Outer/infill setting (outer wall tend to cause print in place to stick together) Test Hinge can…
I designed this planter pot to accommodate my household cactus when it grew beyond its original pot. Now you can have whatever plant be an archtree just like the one in Firelink Shrine in Dark Souls 1. Took me about 24 hours to print, but…
SUB-PLINKER (Plinker 2.5): The Sub-Plinker is a compact, low-power shell ejecting blaster with printed projectiles. The design was heavily inspired by the Kriss Vector submachine gun and the Ticon pistol from Cyberpunk 2077. This is a…
Printed in PLA with .15 layer height and .4mm mozzle on a Voron Trident 350mm. Filament used is iiidmax Fluorescent Green PLA+. This adds a little bit of marble mixing when adding marbles back into the hopper. For a future design update I…
I wanted a way to Join my Lack table Enclosure cells Horizontally without having to put holes or use screws to make disassembly and moving it quicker and easier in the future. Printed in PETG at 15% infill .5mm Layer height with .8mm…
Remix of Reolink RLC-520 junction box without hole on the side. All cables comes from the back side in this case.
As with the original, you need to insert the power supply from the back side because it is (inexplicably) flared a tiny amount. I printed in PETG but any material should work fine.
These are three rackmount trays to hold my homelab components. 2x BeeLink S12 Minis 1x UCG-Ultra 1x FlexMini switch I modeled the front plate and trays together and split them in the slicer. The front plates will barely fit a standard i3…
-This is your Gun Pla-worth tray set. Hexagonal shape trays - 124mm (4.88") x 19mm (0.75") 5 unique designs patterns. Use them individually or linked. Connector will link trays at all 6 sides - infinit linkage! Hive-like arrangement…
Bought a WeVibe Bond and discovered it's really not made for all sizes. It does come with an expander link to add a couple of millimeters, but that's not nearly enough. So I made this model in Fusion 360. It's has parameters, so you can…
A Carlinkit mount for the original phone holder of the Dacia Sandero Stepway. Plug and play. Print it in asa/abs/petg
Improved tracks with links consisting of 2 perimeters instead of 1.
Sollte unbedingt mit Support gedruckt werden, ohne könnte es ziemlich schwer werden. Ich hab es mit ABS gedruckt, PETG sollte aber auch kein Problem sein. PLA ist zu brüchig, daher leider nicht optimal.
This is V2 of the “linkable tool holders” that I have published previously. The updated version will attach to the Festool MFT-3 using a remixed shorter version of the Festool MFT-3 nut in the same principle as the original Festool…
Print one of each piece. No supports should be required in the right orientation. Connect the two half-link pieces inside the full link so they are locked together. Solution of this puzzle is possible without breaking the half pieces…
It’s a slightly modified version of the CS charm collection, suitable for use as a keychain or similar accessory.
A Simple Wall holder for the Blink Sync Module 2. Just use a decent 25mm double sided tape to stick it to the wall. Approx 10g of filament at 15% infill - 30 minute print on a Ankermake M5.
This is a linkage that transforms shape. Two of its states are a cube and an octahedron, passing through a cuboctahedron state. It also has other shapes that it can fall into, which makes it a bit of a puzzle to work out how to make it go…
I ran with 4 walls and 25% infill but I'm sure it would work with other variations.
Each ornament has a hole to fit on the Holiday Tree display - https://www.printables.com/model/293551-holiday-tree-display-with-ornaments-toppers Check it out!
Opted not to do with the shelled design as it actually took up more filament and time to print than doing standard infill Included the f3d file incase you have fusion and want to change the angle (Sketch labeled "Sketch 2) has the angle…
This is a Wall Mount for the Linksys Velop Pro 7 WiFi Mesh System Node. I didn't want to buy one so I decided to just make my own and share.
Printed at 0.1 mm, slightly hotter in PETG (so get a glossy finish). Print the hollow backing and T bar in one colour and the round “dot” insert in another. I did transparent and black. Press fit the dot into the backing (it's a tight fit…
There was certainly simpler ways to seal the entry point for the Starlink cable (or any cable around 6.86mm) entry point, but I saw a design that I wanted to try a variation on. This model is set up to use M3 threaded inserts and machine…
StardrawMegalink - Robotic drawing arm Introduction The project aims to create an experimental prototype of a drawing arm with a base. It is designed to test inverse kinematics. The software part is provided by a Micro:bit microcomputer…
This should work for watches that use a 24mm band, such as the ticwatch pro 5. Works with the quick release pins to connect to the watch. If you don't have any from another watch band, you will need 2 24mm quick release pins. The clasp…
A 19" 1U rack mount for the DGS-108 switch from DLink. Both parts are screwed together with a screw and nut. I used M3 bolt and nut. Glue is not needed. It is best printed in PETG or a more stable material, as suggested by the original. I…
very quick and basic design to take either the very cheap and cheerful multi function mobi mountain headphones- also known as ‘youcut’ and fit to neo 3 link…. OR the excellent Koss porta pro, my personal recommendation- to fit to the pico…
This jig allows you to drill straight, perfectly-spaced 13/64" holes in DAA Lynx belt links, so you can screw your equipment directly to the belt using Chicago screws, thereby preserving the belt's flexibility and increasing its…
Need to hide contact sensors inside custom built in storage with cabinet style doors. Seems makers of contact sensors only feel they should be clearly visible and mountable on a single plane… So here is a yolink magnetic contact closure…
Logos of Linkin Park. I'm just happy to see them back :) File names ending with '.h' indicate that there is a model with a hole at the top. In lowing memoryre of Chester..
Easy ruler for reading how much weight is on the Eisenlink Adjustable Dumbbell (https://www.amazon.co.uk/dp/B0BZHHCSFD) The left side of the ruler measures when only the 2kg plates, are used. Read the right hand side when 2 x 1kg plates…
This is my rendition of the classic "Blinkenlights" meme, as seen in the ancient tomes of the Unix "Jargon" file, and various computer labs, clubs, etc. throughout the world. If you're confused by this, see Wikipedia for more details (…
Ein Lastenrad macht erst richtig Spaß, wenn man für seine unterschiedlichen Transportaufgaben auch individuelle Lösungen zur Hand hat. Das was die Systemhersteller oder der Handel so anbieten kann meine Anforderungen leider nicht wirklich…
Thanks to the original creator Gero for the base file I remixed here! The hole template can be found on their original model page. V2.1 added, slightly better detail
this is a small centerpiece for a portable dipole or linked dipole. it has space for a balun core and the cables can be directly winded on the centerpiece. there are also some spareholes to hang some other stuff on it. pictures will come…
This is a extended 4 inch servo linkage using the 25T servo gear mount
Simple stand for Linkin Park Logo .
This is an adapter for this Logitech shifting Knob (https://www.printables.com/model/897352-logitech-gear-shifter-knob-adapter-sim-racing), because there not fit together I recommend to put a screw in it from the bottom hole to make it…
Just a model I whipped up of the Surface Docking connector I use for product development. Handy for Boolean operations in your favorite CAD program. The LED indicator placement is approximated by a 0.01mm protrusion which doesn't exist in…
A TPU snap enclosure for the eufy Security by Anker SmartTrack Link. Printed out of SainSmart teal TPU with the default settings for SainSmart TPU in PrusaSlicer. 0.15mm layer height paint-on supports under the keyring hole (included in…
I lost one of the caps from my Cube ACID GILINK grips and modelled this one from the remaining one. The cap can be installed with a larger coin (like 1 € or 2 €) or even the round side of a key. Not much force is needed to install it. It…
Remixed to suite my mount preferences. Changes from the original: repositioned countersunk screw holes chamfered edging smaller wall base wire routing hole is more accurate to metal mount plate Fusion 360 file included.
Disclaimer: This will definelty void your warranty, you can easily break your very expensive starlink dish, do not try this if you are not confortable with DIY projects. IM NOT RESPONSIBLE IF YOU BREAK SOMETHING, DAMAGE PROPERTY OR HURT…
Please note, this doesn't have the lock mechanism (it would be pretty easy to add, just haven't done it yet cause I was too excited to get this up and running, lol). The weight of the Satellite should be plenty to keep in place for now. I…
Had someone request this devil in big emblem and chain link form, so here it is. Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag All the settings are set in…
Add a modern geometric touch to your style with these Geometric Square Link Earrings . This design features a series of overlapping square shapes that create a clean, minimal, and contemporary look. The open structure keeps the earrings…
This is a variation on the linked tori . I have been playing around with twisted movement. I think this sculpture looks nice and is fun to play with.
Printed using a Mk3S+ on PLA, PETG as well as ASA-X on 0.4mm nozzle on 0.2mm layer hight, takes around 1.5 hours with default settings @15% Infill.
With Revel closing their doors, I figured I would release my rear linkage design for anyone to print. I've have been selling these for the last 4+ years with hundreds of happy customers, myself included. I have designs for the Rascal V1,…
Check out my Amazon Page to see what kind of gear I use to make these models! This was my submission to the 2014 installation of ' Linked ', the collaborative art project between PrintToPeer and Jeff de Boer. I used the blank template…
Custom protective case designed for the TP-Link switch model TL-SG108PE , an 8-port Gigabit Easy Smart Switch with 4 PoE+ (Power over Ethernet) ports. This case was engineered with the following features: Proper ventilation : multiple…
Covers the Beyond 2 Linkbox USB-PD Adapter from MMI Modular. Perfect for protecting the adapter when stashing it "who knows where". Just seat in the bottom portion and slide the whole thing in until it locks; no additional hardware…
Inspired by Helaman Ferguson's Four canoes . Two tori can be joined and then rotated inside each other. A variation of this design is the Twisted linked torus . I modified the design so it could be printed without support. It also has a…
Small signboard for your Blink doorbell to reduce solicitating. Works for normal installation or 25 degrees corner mount. No hardware needed. Write your own letter (Orcaslicer) Select Emboss tool and add a Text object Write your text,…
The Golf's Gearshifter was defect, because the gearshift inner guide was defect. To get the car running again, at least temporarily, I redesigned the gearshift guide. The challenge with replacing it is that the entire assembly can only be…
I couldn't find any mounts that would allow the usb ports to remain free on the t34. This allows you to mount the mini PC to the wall with 4 screws, and to the mounting holes with two m3 SHCS or BHCS.
I printed this with PLA, flat side of the bracket down on the printer plate. The locking mount feature of the RM4 pro already had a good fit from the original 3D file. Two screw holes provided.
Skadis mount for the D-Link go 5-Port 100MBit switch. It uses the fantastic T-Clip System from Line Arc Line. You need two of the clips for this mount.
I designed this 4-bar-linkage Hinge, to have the Doors of my Vcore4 400 fold outward to the side of the printer in a controlled way. I’m using 6mm PC Panels for the door, and 6mm ACM + 8mm Insulation for the Sidepanels. I also added a DXF…
Base for the Jabra Evolve Link, tied to the desk with my headset holder. The two 9x2 mm magnets allow the remote to rotate as I move with my headset and offer pull resistance in case of jerk (the magnets connection breaks before the jack…
I had a switch, and the mod10 rack has a top & bottom row that are only 0.7U. Guess what. Contents This is a rack mount tray for TP-Link ES208G L2 managed switches, and them only due to the locating mechanism (their feet). Recommended to…
