1 / 2

Cube ACID GILink Compatible Handlebar Cap

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

I lost one of the caps from my Cube ACID GILINK grips and modelled this one from the remaining one.

The cap can be installed with a larger coin (like 1 € or 2 €) or even the round side of a key. Not much force is needed to install it.

It should work with any material, but UV resistance (like with ASA) might be beneficial.

Printed with 0.1 mm layer height.

Supports should be enabled only where needed (the green areas in the image below), because otherwise they might be difficult to remove.