1 / 2
Cube ACID GILink Compatible Handlebar Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Handlebar Cap that is compatible to Cubes ACID GILink Grips.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 38
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I lost one of the caps from my Cube ACID GILINK grips and modelled this one from the remaining one.
The cap can be installed with a larger coin (like 1 € or 2 €) or even the round side of a key. Not much force is needed to install it.
It should work with any material, but UV resistance (like with ASA) might be beneficial.
Printed with 0.1 mm layer height.
Supports should be enabled only where needed (the green areas in the image below), because otherwise they might be difficult to remove.
