1 / 1
Blink doorbell signboard *No Soliciting* EN/Fr or write your own text (multicolor) — zdjęcie 1

Blink doorbell signboard *No Soliciting* EN/Fr or write your own text (multicolor)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

(Multicolor print) No Soliciting signboard for your Blink doorbell. English, French or write your own text version.

Ocena
0 / 5
Polubienia
6
Pobrania
24
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Small signboard for your Blink doorbell to reduce solicitating. Works for normal installation or 25 degrees corner mount. No hardware needed. 
 

Write your own letter (Orcaslicer)

  1. Select Emboss tool and add a Text object
  2. Write your text, strongly suggested to use bolt letter without too much details -
    e.g. SegoeUI
  3. Scale the letter (height)
  4. Increase Depth (strongly suggested to use a value between 1.2 and 1.5 mm)
  5. Exit Emboss tool and move the Letters to fit the signboard, place the letter on top of the base object, slightly in the object
  6. In Objects (on the left), select the letters and change Filament
     

Installation

  1. Slide the signboard on top of the Blink doorbell
     

Print instructions

  • Nozzle:  0.4 mm nozzle or smaller
  • Material: PETG for heat resistance, or PLA if your doorbell is well protected from the weather (at your own risk)
  • Wall: minimum 3
  • Infill: at least 15% (but not really needed since the walls are small)
  • Orientation: print flat to avoid support
  • Ironing: strongly suggested, to use ironing on the letter only (create a modifier to cover the letters/ select the letters and use Ironing "On top surfaces")

Tagi