P
Printables
Doorbell rain cover
Suggest printing out of PETG or other UV resistant filaments. Designed to fit nicely around 50x82mm button.
Wyniki wyszukiwania: doorbell
Liczymy pasujące modele…
P
Printables
Mounting plate for Ring Wired Doorbell
If your door is framed with brick molding, you don't have room to mount a Ring wired doorbell flat against the molding. This plate conforms to common brick molding and provides a flat surface to mount the doorbell. This design works…
P
Printables
Reolink doorbell 45 degree wedge mount STL and F3D file
Opted not to do with the shelled design as it actually took up more filament and time to print than doing standard infill Included the f3d file incase you have fusion and want to change the angle (Sketch labeled "Sketch 2) has the angle…
P
Printables
RING Video Doorbell Mount Weather Shield
One of my RING Video Doorbell is mounted in the open and required some protection from the weather. This is a basic shroud that provides some protection form sun and rain. Printed in ASA for UV and Temp tolerance.
P
Printables
cover doorbell
soportes no necesarios, cubierta para timbre D9 dimensiones del timbre 102*63*31 mm
P
Printables
Doorbell Cover
This is a cover for my doorbell against rain and snow. Printing it is pretty straight-forward, you can print it in one piece.
P
Printables
TAPO doorbell roof + cable insert WI-FI camera TP-link
#YouTubeUnboxing #Tapo #TapoVideoDoorbell #TapoWiFiDoorbell #TPLinkTapo #TapoD210 #TapoD225 #TapoD230S1 #TapoD235 #smartCamera #WiFiDoorbell #2KVideo #3MP #5MP #2304x1296 #2560x1920 #fullColorNightVision #IRNightVision #PIRMotionSensor…
P
Printables
Ring wired doorbell 22.5degree
For the Ring Video Doorbell Wired 1st Generation – 2021 Release
P
Printables
Ring Gen 2 Wired Doorbell mount for siding
This model provides a bracket for mounting a Ring Gen 2 Wired doorbell on siding with the common 1/2" step every 4" of height. The model fits between the siding and the bracket the comes with the doorbell, allowing the doorbell to remain…
P
Printables
Ubiquiti Doorbell G4 Pro (Wifi) mounting base plate for gang boxes
Mounting plate for putting the Ubiquiti G4 Doorbell Pro (Wifi) and Angled Base Over a Gang Box Where I live (Germany) it's quite common to not only have a hole with a cable where your doorbell goes, we often have gang boxes…
P
Printables
Logitech Circleview Doorbell Cover
Used PETG material to print this model. Black is shown in the photo but also printed a white version as this doorbell tends to overheat in the summer with sun exposure.
P
Printables
EZVIZ Peephole Doorbell - holder
EZVIZ DP2 2K WiFi, EZVIZ DP2C, .... Holder for example for a powerbank Fits on hooks The holder does not restrict the removal of the display Print: easy printing supports - no perimeter - 3 layer - 0.2mm filling - 15% gyroid material - PET
P
Printables
Stříška pro domovní zvonek. Doorbell.
Stříška pro tento zvonek: https://www.alza.cz/emos-domovni-bezdratovy-zvonek-p5731-d5881138.htm Upevnění na sloupek průměru 69mm pomocí elektrikářských stahovací pásků. Držák je odnímatelný a můžete si vytvořit vlastní. Tisknul jsem z…
P
Printables
Reolink Battery Doorbell Siding mount.
This is a an adapter to allow a REOLINK 2K Battery Video Doorbell to mount to siding. In my case it's staggered Hardy Board, but it will work for any siding with a 12mm thickness and a ~7 degree angle…
P
Printables
Doorbell Angle Wedge Mount - 3D Printable STL File
Keep your smart home tidy with this Doorbell Angle Wedge Mount Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
P
Printables
Doorbell Angle Wedge Mount - 3D Printable STL File
Keep your smart home tidy with this Doorbell Angle Wedge Mount Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
P
Printables
Wedge Reolink Video Doorbell - 37.5 degree
Wedge made for Reolink video doorbell 2K POE. Standard wedge is 15 degrees, this wedge is 37,5 degrees. The design is almost identical as the original one.
P
Printables
Reolink Doorbell Rain Cover - antitheft, raincover & wall base
Remixed to suite my mount preferences. Changes from the original: repositioned countersunk screw holes chamfered edging smaller wall base wire routing hole is more accurate to metal mount plate Fusion 360 file included.
P
Printables
Ring Doorbell Removal Tool
Print with non-brittle plastic on its side at 100% infill. Do not print with business end facing up. Support may be needed for keyring hole.
P
Printables
Reolink Doorbell Vinyl Siding Spacer
Spacer to fit Reolink POE Doorbell to Siding I installed a Reolink POE doorbell, but my doorbell was located on vinyl siding such that the doorbell can't fit flush to the mounting surface. Functionally, that works fine, but it looks ugly.…
P
Printables
Yale Doorbell Roof
Protectioroof for the Yale Doorbell Used double sided tape to make it stick
P
Printables
Google Nest Doorbell Wired (Gen 3) Wedge - 30° (Degree) Angle
Intended Design/Use The 20° (degree) wedge that is included with the Google Nest Doorbell Wired (Gen 3) may not give you the camera view and coverage that you want/need for some installations. This 3D printable version was designed to…
P
Printables
Parasoll adapter for coil - doorbell extension
I use this cover to make my doorbell from the 70s fit for Home Assistant. Prerequisite: double sided adhesive tape relais you are willing to sacrifice a rectifier from scrapped electronic (my doorbell receives 12v AC) some cables…
P
Printables
Adjustable Wall Mount Bracket for Ring Video Doorbell 1|2|3|4
Adjustable wall mount bracket compatible with Ring Video Doorbell 1, 2, 3 and 4. The mount uses a ball-joint adjustment
P
Printables
Doorbell Chime Cover NuTone
Doorbell chime cover for NuTone model 5764 (made in 1959) Front design matches two panel roman/arch top doors from the manufacturer Reliabilt Details Print Material: PLA Orientation: On side to minimize visibility of layer lines Supports:…
P
Printables
Tapo D225 Doorbell Light Cover
My porch light sconces shine directly into the lens, which was never an issue with my old Nest doorbell, but the D225's 180-degree wide-angle lens made the glare a real problem. This cover is a pressure fit, so just push it on! Print…
P
Printables
Unifi G6 Entry Doorbell 45° adapter
45° adapter for Unifi G6 Entry Doorbell. The included 20° adapter was used as a template. Holes for M3 threaded inserts have been prepared for screwing the adapter plate in place.
P
Printables
Wyze Video Doorbell Pro Adapter Plate
This is a copy of the mounting plate included in the box with the Video Doorbell Pro! I used it to create a plate to fit in my existing intercom system, replacing the old broken doorbell, but I wanted to save y'all the time of creating…
P
Printables
Ring doorbell Tilt and Angle mount
Ring doorbell mount with a 5 degree tilt downwards and angled approximately 68 degrees on the horizontal plane. Designed for the Ring Video Doorbell Wired but I believe all the ring doorbells have the same mounting holes, so possible…
P
Printables
Doorbell: Pivoting Nameplate
A replacement part for doorbells or mailboxes that have a pivoting nameplate
P
Printables
Honeywell Doorbell Speaker Mounting Bracket
This is a bracket made for attaching a Honeywell (wireless doorbell system) speaker. It is not rare that I find that spare parts for products are not kept in stock for a longer period of time, so I decided to reverse engineer this bracket…
P
Printables
Eufy E340 Video Doorbell Spacer
This is a 10mm spacer for the Eufy E340 doorbell that allows it to clear the trim around my door while using the 30-degree angled spacer. PETG works the best, but PLA would suffice in mild climates. 15% infill
P
Printables
Updated - Unifi G4 Doorbell Pro - Ubiquiti Siding Mount
Updated (April 2026): I have updated the file as I cleaned it up and made some slight modifications (thichness, wire opening). V1 and V2 are the same width and heigh but the back is slightly different to try to stay flush to my siding.…
P
Printables
Reolink Doorbell Wifi and or POE Tilted Rain Cover with anti-theft
I needed a tilted support. My camera is installed on the corner of my house's front wall. With this support, my camera now covers my house's front wall. I used 3x4x4 heat inserts for fixing the original support plate but you can also use…
P
Printables
Wyze Video Doorbell v2 Angled Back Bracket for Secure Cover (remix)
Short Story: My doorbell camera didn't quite give the view that I wanted, so I found a model that covers the microSD card slot and modified it with a 12° downward angle to give a better view of the porch in case packages are left there.…
P
Printables
WYZE Doorbell V2 siding adapter
My old doorbell was mounted on my siding. The new WYZE video doorbell would have been mounted angled down without an adapter. So I whipped one up. This one has two sets of holes. One for the new doorbell plate and one to mount the adapter…
P
Printables
Reolink Video Doorbell 45 Degree Corner Mount
The included wall plate for the Reolink video doorbell only has about a 15 degree angle so doesn't suit a corner position well. This mount will let you attach this fully in a corner while mounting to only one side. As this is outdoor, I…
P
Printables
Tapo S200B Doorbell Enclosure
An enclosure for a Tapo S200B to use it as a doorbell. Should give some degree of protection against the elements and hide the button to help prevent theft. Base uses a reverse thread, there are two versions: one with holes to allow use…
P
Printables
Reolink Doorbell Wall Mount
Base pour la pose murale de la caméra Reolink Doorbell avec une surface prévue pour mettre votre nom.
P
Printables
Corner Bracket for Ring Video Doorbell Gen (20° and 45°)
This custom-designed corner bracket is specifically made for the Ring Video Doorbell, providing optimal viewing angles at both 20° and 45°. It’s perfect for ensuring your doorbell captures the best possible footage, even when mounted on…
P
Printables
Ring Camera Doorbell Mobile Home Trailer Siding Mounting Kit
This is an easy to print mounting kit for a Ring Doorbell. Works with Ring Doorbell models 1 and 2. I designed the mount myself to custom fit my siding on my mobile home. The angled mounts and rain cover are altered versions (original…
P
Printables
ESP32 Video Doorbell with Display
Case for LILYGO TTGO T-Camera with optional mounting of a dual channel relay (enables independent triggering of the gong and the camera) This case was inspired by ESPHome-VideoDoorbell by petrepa…
P
Printables
Reolink Video Doorbell WiFi peephole adapter
Hi, this is an adapter which you can use to install your Reolink Video Doorbell WiFi on your door instead of the peephole. Push the power wires through the shaft, attach it to the reolink and attach the reolink to the adapter using 2x…
P
Printables
Assisted Doorbell cover
People kept ringing my doorbell and running away, so I printed a cover as none of us in the dorm require use of the accessibility doorbell. Interior box dimensions: 80mm by 125mm full model dimensions: 90mm x 135mm x 24mm Print settings…
P
Printables
AXIS A8105-E Doorbell Cover
I needed a way to cover an AXIS A8105-E doorbell intercom to be exposed at certain times and covered at others. This is a simple box that does that job.
P
Printables
Cat DoorBell Cover / Katzen Tür Klingel Abdeckung
EN I don't need my cat bell at night and the light disturbs my sleep. Unfortunately, it can only be switched off on the transmitter. So I designed a simple cover that can be slipped over the receiver to keep the light out. The model file…
P
Printables
Ring doorbell lastest version
For your latest ring doorbell. This is 60 deg bracket that fits with the attachment bracket. I used 4 m3 brass threaded nuts pressed in. Then used m3 x 8 mm countersunk screws. Finally 2 screws to mount along the house. Happy printing!
P
Printables
eufy Doorbell 2K HDR T8200 Rain Cover
This is a small rain cover for a eufy Doorbell 2K HDR T8200 with optional mounting wedges (15° or 30°). I glued the 30° mounting wedge to the rain cover with epoxy glue and attached it to the wall with the eufy mounting plate and 3.5x40mm…
P
Printables
Wall plate for Reolink Video Doorbell Camera
Wall plate for Reolink Video Doorbell Camera (POE). Fits perfectly with the camera. When 3D-printing avoid warping. I advise the following: Turn the item 90ºZ Ironing/enable ironing 0.15mm quality PLA Print settings: skirt and brim: draft…
P
Printables
All-new Ring Battery Doorbell 45° Corner Wallmount
I searched for a 45° Wall mount for the new Ring Battery Doorbell. but couldn find one. So i made one :) You need some 6mm Woodscrews and some dowels. To fix the Baseplate you need Four 13mm x3,5mm Woodsrews. You could also insert some…
P
Printables
Magnetic Mount for the Ring Video Doorbell
I have a steel door with glass on either side and no wires run for a doorbell. The Ring Video Doorbell seemed a good fit, but my general issues with technology commitment (sorry Amazon, it's you not me) kept me from wanting to run screws…
P
Printables
Eufy Video Doorbell mount and cover
Description I made this mount to replace an aging and rusting intercom that had stopped working. The cover over the top helps with shading a little and protects the doorbell from some weather. Printing I have the mount printed with fuzzy…
P
Printables
Reolink PoE Doorbell In-Wall Box
Origin I wanted a box for the Ethernet cable for the Reolink Doorbell for a new house build where the drywall is not up yet. I designed this to hopefully channel any water back out of the box and wall due to the angled bottom. You'll want…
P
Printables
Wyze doorbell mounting plate
Replacement mounting plate for wyze doorbell camera V1 because teh original is very prone to breaking. must have wires connedted to camers and then slide the wires into the bracket, screw the bracket on and push the wires behind the plate…
P
Printables
UniFi Doorbell PoE Single Gang Mount
I needed a adapter to mount on a single gang electrical box, and didn't want to but one. So,I remixed a mount I found. I made it to use the exsisting small black screws you would use to mount the adapters that were provided. I needed a…
P
Printables
G4 Pro Doorbell Extender
My unifi G4 pro doorbell did not quite fit in the width between the edge of the house and the edge of the front door. I needed a simple extension bracket & I did not see any here that fit my needs so I made this. This is a 70mm extension.…
P
Printables
Nest Doorbell (Wired, 2nd Gen) Extended 45 Degree Mount
I needed to have a 45 degree mount for the doorbell, and my old doorbell was installed in a nook in the door, so the Wasserstein mount wouldn't fit. I created a mount that has an additional 3cm extension before rotating 45 degrees. Also,…
P
Printables
Halloween project: Spectral Doorbell with ESP32
Spectral Doorbell with ESP32 and Ultrasonic Sensor 🕷🎃 Want to surprise your guests with a spooky, original DIY Halloween idea? In this video, I’ll guide you step-by-step on how to create an interactive Halloween doorbell using an ESP32,…
P
Printables
Nest Doorbell Gen 2 (wired) 45 deg mount
Remixed this mount to make the fit a little bit better to include: Shaved top sides Variable screw angle More depth for screw mounting location & silver pucks (see model - not printed example)
P
Printables
eufy E340 Dual 45 Degree Bracket - Uses 54mm standard doorbell original mounting holes
45 degree bracket for eufy E340 Dual Battery Powered video doorbell that uses the existing 54mm #3 screw holes. Print on closed face No support required for some printers. If any, supports painted for recessed rectangles
P
Printables
Ring Doorbell Siding Mount
Ring doorbell mount for old 2" wood siding. Print on flat face, no supports required. Not intended to replace the stock ring mount but rather add support for the original mount for 2" wood siding on older houses. Can be mounted with #8…
P
Printables
Doorbell rain cover
Suggest printing out of PETG or other UV resistant filaments. Designed to fit nicely around 50x82mm button.
P
Printables
Ring Doorbell (2024) Removal Tool
Recently, I got the new 2024 Ring Doorbell that has a little tool to remove it from the house to charge. I figured I'd lose this little tool, so I decided to model my own so I can make another one if/when I lose it. No support needed,…
P
Printables
Ring Doorbell 4 Shade and spacer V2
This is a ringdoorbell 4 mount and shade V2 to protect the ringdoorbell from the elements, reduce sun glare and reduce rain from making the screen unclear and also gives it a 3 mm spacing from the wall. You should print in PETG or ASA for…
P
Printables
Ring Doorbell Button
This can be used to replace the ring doorbell button. I find the original one that comes with the doorbell to be flimsy and breaks easily. The size may need to be slightly enlarged on the splicer for your specific ring doorbell.
P
Printables
Wyze Doorbell Pro Vinyl Siding Mount
There is a “wedge” version which has a 5% downward angle of the mount so that you can see packages closer to the wall. The non-wedge version does not include the 5% downward angle. You can download the model or edit the model directly in…
P
Printables
Nest Hello Video Doorbell Brackets
Included are 3 different sizes and 3 different angles of 0 (straight), 15, and 30 degrees. The bracket is symmetrical and can be flipped if needed. You can also add the 15 degree bracket included with the camera to get 45 degrees if…
P
Printables
Wyze Doorbell Mount for Vinyl Siding
Print out of PETG. The ring fits over the stock mount to hide the gap. Should fit over it fairly tight. Adjust accordingly.
P
Printables
Doorbell Sign with Arrow (Left or Right)
A simple sign designed to direct people to a doorbell that is hard to find, in right and left versions.
P
Printables
.5in Mount for Logitech Circle View Doorbell
Provides space for doorbell wires behind Logitech Circle View Doorbell. I printed it in ASA-CF, with a fuzzy skin. Allows the doorbell to face out while having extra wire space like the angled mount.
P
Printables
Ring Doorbell Standoff
This 3D-printable standoff mounting plate is the perfect solution for installing your Ring Doorbell when the mounting surface is too narrow. By adding this buffer behind the doorbell, you create enough space for it to sit flush with the…
P
Printables
Aqara Doorbell G4 Shield for 20° Wedge Bracket
installation using double-sided adhesive tape material PETG
P
Printables
ESP32-Cam Doorbell Camera
This housing is intended for outdoor use of the ESP32-Cam microcontroller. There are fixtures for 5mm LEDs. I use infrared LEDs, so the camera can be used in the dark without visible light. But this requires a small modification of the…
P
Printables
Ubiquiti G4 Doorbell Button
Replacement button for the Ubiquiti G4 Doorbell... these become quite brittle and ubiquiti dont offer a replacement part. Printed using ABS-like 3.0 Photopolymer Resin from Elegoo.. ----------V2---------- Redesigned the top layer…
P
Printables
SimpliSafe Doorbell offset angle spacers
Angled spacers from 5 degrees to 30 degrees to allow you to mount the SimpliSafe video doorbell in corners. Designed or SLA printing, but can be printed with high accuracy FDM printers.
P
Printables
Ring doorbell anti theft protection
Originally printed with PLA and it's been a year and works just fine, I guess PETG or ABS would be better. I printed it with 70% infill to make it more robust. It screws from the back of the ring back plate.
P
Printables
Ring doorbell Eken V5 cover
This contains one design for wall mount and second design for mounting to fence column diameter 90mm. I tried it with eken V5 doorbell but probably it will be suitable for many other types with similar dimensions. In design I have…
P
Printables
DoorBell Chime Spacer... For NEST Chime Connector addon
Design a Cover spacer to be able to Hide my NEST chime Connector inside my new doorbell chime Cover. It was impossible to fit it inside so I made some space. The spacer pop on the chime base and you can fixe the original cover onto it. My…
P
Printables
Smart Doorbell case for Raspberry Pi 5
This case was designed for a DIY smart doorbell prototype, containing a Rasberry Pi 5, USB mic, USB speaker, Pi Camera 3, Button, LED, Pi power adapter + 90degree dongle. Follow the tutorial here:…
P
Printables
Loxone Double Frame Angle Adapter (30°) for Smart Doorbell
This practical 3D-printed angle adapter lets you mount a Loxone double frame, including the Smart Doorbell, at a 30° tilt. By adding this slight angle, you can optimize the camera’s field of view or the doorbell’s sensors, ensuring better…
P
Printables
Nu-Tone Doorbell cover
My sister's Mid-Century Modern house has an original Nu-Tone doorbell but the cover was gone. I designed this cover to be printable on a MK3/4 printbed in 4 pieces. Small amounts of super glue needed to connect parts. Fits Nu-Tone model…
P
Printables
Ladestation für Ring Doorbell 2024(charging station for Ring Doorbell 2024)
Ladestaion für Ring Doorbell 2024 -Fach für Die Anleitungen -Fach für das demontage Werkzeug -Fach für EU Stecker 2A -Fach für USB-C Stecker -Fach für Ring Doorbell 2024 DIe Ladestation kann an die Wand montiert werden, oder einfach nur…
P
Printables
Aqara doorbell receiver / chime UK double socket spacer
Spacer for a double UK socket (2 gang) to hold your Aqara G4 doorbell receiver / chime with pegs to wrap the wires round too.
P
Printables
Ring Doorbell Wedge Mount (Pro & Pro2 WIRED ONLY)
The Ring doorbell wedge that is paired with the original doorbell camera was too steep of an angle for my liking. Decided to model my own version with less of an aggressive angle. THIS MODEL WILL ONLY WORK FOR (Pro & Pro2 Models WIRED…
P
Printables
Wyze Duo Doorbell
This Model allows you to print a cover for the Wyze Duo Doorbell in any color you have. Currently I used PLA as the print is 1mm thick and flexible.
P
Printables
Honeycomb Key Rack With Doorbell Mountplate
Honeycomb Key Rack designed for easy installation, featuring a mounting plate that securely attaches beneath your doorbell for a functional and stylish addition to your entryway. Countersunk M4 bolts are used to make the keyholders more…
P
Printables
Reolink Doorbell Riser -Narrow Base
This is a riser designed to bring the doorbell out even with the brick surrounding my door. It has a tapered base that fits on the doorframe which is slightly narrower than the doorbell housing. If printed on its back it doesn't require…
P
Printables
Ring Doorbell (first gen) wedge, reuse holes
I rebuilt the Ring Doorbell Wedge so I don't need to add new holes in the wall. Inspired by Angle Doorbell Mount For Ring Wired by Liam and Ring Doorbell Wedge Remix by Jeff_Borghoff - Thingiverse This is for the initial Ring doorbell…
P
Printables
Flic 2 doorbell
A simple doorbell plate with Flic 2 support and a clear area to add your name (or everything you like) on it with any slicer.
P
Printables
Arcade Button Doorbell box
Box to make a doorbell with an arcade 30mm button, consider two types of arcade buttons with external and internal microswitch Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 **Rafts:** Yes Supports: Yes…
P
Printables
mounting plate for Arlo doorbell
my doorbell came without the mounting bracket so i designed on and it works 15% infill no supports needed i used petg filament since it will be used outdoors i also have the cad file in case adjustments are needed b