1 / 1
Base plate for the Honeywell DCP311 / DCP511 / DCP911 doorbell button. — zdjęcie 1

Base plate for the Honeywell DCP311 / DCP511 / DCP911 doorbell button.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The hooks of the original baseplate get easily broken off. This is a replacement for the baseplate.

Ocena
5 / 5
Polubienia
31
Pobrania
1187
Wydruki
12
Wyświetlenia
5620
Oceny
11

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. 

As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts: a base plate with 2 rectangular holes and 2 separately printed hooks that you can insert in those holes.

The base plate should be printed with support because there is a small part that doesn't touch the bed.

The hooks are easily printed on their side. After printing, push them in the holes. A little drop of glue can be usefull to firmly hold them in place.

 

Tagi