1 / 4
Unifi Doorbell Lite 20°/25°/30°/35° Wedge Mount — zdjęcie 1
1 / 4

Unifi Doorbell Lite 20°/25°/30°/35° Wedge Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Different angle options for the Unifi Doorbell Lite

Ocena
5 / 5
Polubienia
29
Pobrania
329
Wydruki
0
Wyświetlenia
1320
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

20°/25°/30°/35° Wedge Mount for the Unifi Doorbell Lite. Base 20° modelled directly from original wedge mount.

Warning: The 45° version was custom made for a request, unlikely to be easy/possible to screw into the wall directly without some modifications

Uses two Voron standard M3 heatset inserts for mounting of the doobell backplate to the wedge, in the same way as the original wedge.

Recommended filament: ASA for temperature & weather proofing, compensate for shrinkage in your slicer

I've tested the 25° mount, and the backing plate screws in perfectly as long as you compensate for filament shrinkage. Have fun!

Tagi