Unifi Doorbell Lite 20°/25°/30°/35° Wedge Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Different angle options for the Unifi Doorbell Lite
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 332
- Makes
- 0
- Views
- 1,332
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
20°/25°/30°/35° Wedge Mount for the Unifi Doorbell Lite. Base 20° modelled directly from original wedge mount.
Warning: The 45° version was custom made for a request, unlikely to be easy/possible to screw into the wall directly without some modifications
Uses two Voron standard M3 heatset inserts for mounting of the doobell backplate to the wedge, in the same way as the original wedge.
Recommended filament: ASA for temperature & weather proofing, compensate for shrinkage in your slicer
I've tested the 25° mount, and the backing plate screws in perfectly as long as you compensate for filament shrinkage. Have fun!