1 / 4
Simplisafe Doorbell Camera Wedge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Doorbell camera wedged designed to improve the camera field of view. Included modes for left or right side installation with pivot angles of 10, 15 and 30 degrees.
This was designed for the Simplisafe doorbell camera I have with dimension of 107mm tall and 33 mm wide. Be sure the wire hole and screw slots match your camera.
I also recommend printing the model with “To Wall” up. This gave me a clean surface against the doorbell camera.
Finally, I chose to drill new holes at an angle into the wall, so the screws were normal to the doorbell camera mating face.