Simplisafe Doorbell Camera Wedge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wedges installed between the doorbell camera and the wall to improve the field of view.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 221
- Makes
- 0
- Views
- 898
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Doorbell camera wedged designed to improve the camera field of view. Included modes for left or right side installation with pivot angles of 10, 15 and 30 degrees.
This was designed for the Simplisafe doorbell camera I have with dimension of 107mm tall and 33 mm wide. Be sure the wire hole and screw slots match your camera.
I also recommend printing the model with “To Wall” up. This gave me a clean surface against the doorbell camera.
Finally, I chose to drill new holes at an angle into the wall, so the screws were normal to the doorbell camera mating face.