1 / 2
Ring Doorbell Siding Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Adapter for the original Ring Video Doorbell and 2020 rerelease to allow it to mount nicely against 4" siding. I couldn't find anything that fit my needs, so I made these.
They should print with no supports if you print it with the bottom against the bed (the sides are likely to work too, but I didn't try it). If you use these, you will likely need longer screws than the ones that come with the Ring, I used 1.25" #4 wood screws, and they worked nicely.
I printed in PETG, and would recommend that (or ABS). PLA is unlikely to hold up well outdoors.