1 / 2
Ring Doorbell Siding Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Adapter for the original Ring Video Doorbell and 2020 rerelease to allow it to mount nicely against 4" siding. I couldn't find anything that fit my needs, so I made these.
They should print with no supports if you print it with the bottom against the bed (the sides are likely to work too, but I didn't try it). If you use these, you will likely need longer screws than the ones that come with the Ring, I used 1.25" #4 wood screws, and they worked nicely.
I printed in PETG, and would recommend that (or ABS). PLA is unlikely to hold up well outdoors.