1 / 1
Ubiquiti Unifi G4 Doorbell Pro Parametric Wedge Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For mounting the Ubiquiti Unifi G4 Doorbell Pro at 30, 35, 40, 45 angles, on either the left or right side of the door.
- Ocena
- 4,833 / 5
- Polubienia
- 86
- Pobrania
- 1129
- Wydruki
- 6
- Wyświetlenia
- 6914
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 6) (Komentarze: 12)Remiksy (6)Kolekcje (131)Powiązane
Parametric model for mounting the Unifi G4 Doorbell Pro at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell.
Rendered a couple of versions as STL, and added the OpenSCAD source file for more combinations.
Only tested with 40° right side mount, but other versions should hopefully work as well.
Settings for Original Prusa i3 MK3S+:
- 0.20mm Quality
- Filament: Prusament PETG
- Infill: 15%
- Supports: None