Ubiquiti Unifi G4 Doorbell Pro PoE Kit Wedge Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the great mount by @andreasjk_215615. I used his awesome OpenSCAD file and adjusted for the PoE Kit differences
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 291
- Wydruki
- 0
- Wyświetlenia
- 1857
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in black ASA. This is the angle 25 version. I deepened the area for the Ethernet connector, so I didn’t need to cut a large rectangle like they show in their instructions. A smaller hole for the Ethernet cable can be used instead.
I want to avoid confusion: this mount is for the "G4 Pro PoE Kit", which uses an RJ45 port to connect and power the device. If you have the G4 Pro with the USB-C port, this mount is not designed for that device.
I added the OpenSCAD file to the files section in case a different angle is needed. This file originated from @andreasjk_215615 but contains the changes I made. I only tested the angle 25 as that was all I needed.