Schwinn Roadster Tricycle Rear Step
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement rear step using the original hardware for a Schwinn Roadster Tricycle
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Threw together this rear step replacement in TinkerCAD after the original one rotted and broke off my son's tricycle.
It is keyed so that the middle piece is held in place by the outside pieces. I made a minor error in the model so you do need to print the left and right sides. Don't just mirror one, it won't line up. Used a small piece of support material under the cut outs on the left and right sides.
The recesses for the bolts are designed to match the original hardware.
Recommend using PETG for the extra durability and UV resistance.