Leopard Gecko dual color single extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gecko in two parts - to be printed with single extruder
- Ocena
- 5 / 5
- Polubienia
- 205
- Pobrania
- 919
- Wydruki
- 20
- Wyświetlenia
- 3305
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Just print both models in different color and assemble them together.
If you print both models in two colors, you have a gecko pair with swapped colors like shown on the sixt picture ;-)
There is a small gap between the two parts for easier assembly.
For better assembly, there is a model with chamfer on the sharp edges to avoid problems with elephant foot.
Would be happy to see your makes!
I used on my Elegoo Neptune 4 Plus the Prusament PETG Orange and Galaxy Black with 0,2mm layer thickness, 3 perimeter and 10% gyroid infill.
If you want it as a fridge magnet, go here and download it there:
Leopard Gecko Magnet - dual color single extruder (thangs.com)