Parametric Pen Hoder Insert for Tin Cans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3d printed insert to divide up a tin can in multiple sections
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3d printed insert to divide up in multiple sections a tin can, pringles can or any other type of regular cylinder with a bottom. This way the container can be used as a pencil holder or tool organizer.
Parameters
The scad project is attached, so it can be customized for your can size.
The provided 3d models were created with the following parameter:
Peanut
- d_inner = 79.2;
- d_outer = 85.4;
- depth = 68;
Pringles
- d_inner = 72.4;
- d_outer = 78;
- depth = 100;
Modifying the sides parameter you can set the number of divisions for the insert.
Design and print information
Designed with OpenScad.
Printed with Creality Ender 5 pro.
Material PLA; nozzle: 0.6 mm; layer height: 0.3 mm; infill: 0%; wall line count: 2; supports are not needed.