Parametric Pen Hoder Insert for Tin Cans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d printed insert to divide up a tin can in multiple sections
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 31
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3d printed insert to divide up in multiple sections a tin can, pringles can or any other type of regular cylinder with a bottom. This way the container can be used as a pencil holder or tool organizer.
Parameters
The scad project is attached, so it can be customized for your can size.
The provided 3d models were created with the following parameter:
Peanut
- d_inner = 79.2;
- d_outer = 85.4;
- depth = 68;
Pringles
- d_inner = 72.4;
- d_outer = 78;
- depth = 100;
Modifying the sides parameter you can set the number of divisions for the insert.
Design and print information
Designed with OpenScad.
Printed with Creality Ender 5 pro.
Material PLA; nozzle: 0.6 mm; layer height: 0.3 mm; infill: 0%; wall line count: 2; supports are not needed.