105 models
Just a toilet paper spindle in case yours broke. No Springs Needed so Its fully 3D Printable Best Printed with 0.16mm layer height or smaller When installing be sure “Spindle Female.stl” is on the right side to avoid unscrewing while…
Print approx. €3.88–€4.75 excl. taxPreliminary estimate for one variant
Didn't see them so I made them. Let me know if you want more sizes.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
3d model of a Pringles can, with gcode for fitting lids. Intended to support waste reuse.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Super schnelles Geschenk das immer passt. Wir geben noch etwas Geld zwischen Kunststoffdeckel und Folie in der Pringlesdose. Geschenk Fertig. Den unteren Bereich in Weiß habe ich mit Fuzzy Skin gedruckt, das wertet das Model nochmals auf.…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for one variant
Tired of pegs that rust, snap, or vanish into the mystery drawer? This little clip keeps things simple. It is a one-piece design that flexes where it should and holds when it counts. The tapered jaws grab thin fabrics easily, the long…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards
Easy access to your pringles
Did you lose/break the lace lock on your shoes, coat, sweatpants, hoodie, or camping gear? Did they not come with one to begin with? Say goodbye to self-untying shoes and slowly descending sweatpants with this 100% 3D printed gadget.…
Prints without support. I did use a brim, but i dont think its necessary.
A simple and effective design, when you just miss some clothespins. No supports, no brims, no sharp edges. Available with 4 different gap sizes to suit every need. L (4mm gap) M (3mm gap) original design S (2mm gap) XS (1mm gap) Ready to…
I had the idea for a while to add the logo on the Pringles slider, it’s done now.
You ever look at one of the containers from a recently-finished Pringles Snack Stack and say that sure looks like a cowbow hat? Me too. Print it flat, use heat to carefully bend the brim to your ideal shape.
I didn't have springs at hand so decided to mod the original design. Test printed with PLA and is quite stiff. I don't know how to analyze how sturdy it is so use at own risk :p
Large Pringle tray sealable, with flat edge for tray dispensing position and anti rolling. Printed on food safe PLA at 0.20 layer height no infill
Well, i just had try to making one in Fusion 360. It was suprisingly easy.
Protect your stack from "unauthorized snacking" with the Pringles Protector . This functional cryptex-style lock fits precisely over a standard Pringles tube. Using a mechanical stop, the bottom sleeve traps the can's top lip, making it…
This is a mini formicarium for a starting colony which is still in the test tube. The connection is for a 14/10mm hose. All you need is some cotton, a 16mm test tube for water and a Pringles lid. The lid fits pretty tight to prevent ants…
Handy pull-out tray with lid for Pringles cans 🥔 The base keeps the tube from rolling, making serving safer and more stable. Ideal for sharing: everyone grabs their chips without reaching into the can! ✨ A clean and clever solution for…
two types of boxes that use the pringles lid. M 40mm height L 80mm height
For people, who don't want to stuck their hand in a pringles can It can also be used as a lid for the Pringles
Pringles box - more sizes, stackable I've made some more sizes From 20-100mm in 10mm steps If you desire a specific high just let me know, I would adatpt it for you…
***Note - this has only been tested on Pringles manufactured in the USA (~74mm tube and 75mm bottom diameters). Check the diameters before printing. Cans manufactured in the Philippines and sold in Australia may have a different diameter.…
This 3D printable cord lock (also known as a cord stopper or toggle) is a practical solution for securing drawstrings on bags, pouches, hoodies, lanyards, or outdoor gear. It’s designed for easy printing without supports and smooth cord…
This is a springless rear suspension design that removes the need for the soft pen/pencil springs used on the rear suspension. Note: I have printed and installed it on my car and it fits perfectly. The spring stiffness feels pretty good…
Puo prendere facilmente le tue pringles due taglie: -grande -piccolo (ricorda di lavarti le mani prima di mangiarle) ❤
Update 7/2/2019: updated the pringles can default with a tapered base so they stack. Added a photo of Pringles can with an Icebreakers mint top... it fits perfectly. I've been using soda cans for storage using my soda can lid…
I needed a solder station for led strips for my Voron 2.4, and didn't want to have to source springs for the currently available models. There are 2 variants of the arms, one with channels for wires the other is flat, both work just fine…
I made this for a YouTube/TikTok Video… But it actually is very useful. NO Assembly needed . Just print it standing upright. Maybe add a brim if you have adhesion problems. HOW TO USE? — Check out the YouTube Shorts video I linked below…
Salvaged screws are best screws, don't @ me. Dimensions are: Outer tube diameter: 76 mm Diameter across the lip: 78.75 mm Height of the lip: 3.0 mm Bevel on the lip, top and bottom: 0.5 mm Internal edge rounding radius: 5.0 mm Included…
Small storage containers that can be closed with the lid of an old pringles can (Only tested with cans from Germany. Not sure if they are the same in every part of the world). The container are either 25mm or 50mm high, and have one, two,…
You need to print the original model from @neoyarus. Just replace the cover part with this. I think it should fit for the normal and the tight version.
The model is designed in two parts for both strength and keeping the print simple and cost effective. There is a clip part that is designed to clip over the gunwales of the canoe, and the holder part that can be attached with two small…
Nie wieder feststecken – Der Pringles-Lifter für echtes Snacken! Jeder kennt das Problem: Die Pringles-Dose ist halb leer, und man kommt einfach nicht mehr mit der Hand an die Chips, ohne die Dose komplett auf den Kopf zu stellen und ein…
A simple Pringles Chips as close as i could make :) 100% scale is close to real size Print with fuzzy skin for a more real finish Just made it because i won a big Pringles Can and wanted a big Pringles Chips, so i scaled it up to 260% to…
Love pringles? Don't know what to do with the empty packing? You can recycle the lids again. These are various height round storage pots. The see-through lids are idea for identifying all those pesky screws and widgets!
Straw dispenser because the pringles can i had was too small diameter and height. 78mm X 247 mm All parts glued together with super glue Anycubic Kobra 2 Pro Settings: PLA + Temp:225 C Bed Temp: 65C Speed 180 mm/s NO SUPPORTS on parts…
Make use of all those Pringles lids! This container will help you organize with clear lids
This design aims to replace the Pringles can for the Pringles Can Enigma, which can be found here https://cyber.org/find-curricula/pringles-can-enigma . Instead of buying a Pringles can and eating all the chips before using the can for…
I needed an even smaller version of the Pringles box, so this one has a height of just 20mm.
Pringles SPRINT – CHECK BACK FOR UPDATES Post launch pictures and I'll add them to the default photos for this project!! Thank you Truthornothing for the launch picts! Alpha.05 UPDATE Forgot to include the rail button template for the fin…
A small Pringles can that can fit a fifth of a full size can for school lunches.
These sorting trays are supposed to be used with Pringles box: https://www.printables.com/model/251281-pringles-box-more-sizes-stackable There are trays 10 or 20mm high with 1 to 4 compartments. For other heights you can modify the trays…
Good straw dispensers are expensive and most break easily. So I decided to make one out of a Pringles can. The main bar is a good 245mm long so you will need a large prints, it may fit your printer if you turn it 45 degrees. I printed on…
Since I couldn't order my favorite italian clothpegs in my country, I played a bit with bezier curves in openscad, made a terrible quick and dirty scad file but the thing works for me. Edit (21/02/18): Just improved the openSCAD file…
I use a pringles can as a trash can for the prime lines, and was fed up of it taking up desk space so I just made a quick mount. I also have another one that has a cup that holds filament clips. Diameter of the circle is 75.5mm. The fit…
Minimart mini Shelf Products Pack for Diorama Scene - Snack - Instant Noodle - Cookie Box - Pocky - Yogurt - Pringles
In my work I use a lot of recycled stuff. I really love the pringles cans so I like to make new things with it ( http://diwo.bq.com/construyendo-una-linterna-de-sombras/ ) One of the last things I decided to make is create a very cheap…
DIY ant trap using a Pringles can lid and a 3D-printed model. I have tried to incorporate features that make it both effective and user-friendly. When dealing with pests, it's important to consider the safety. There is two handles, that…
My grandson thought he would like to have such a backpack tag. Print with manual color change :-)
First, buy a can of Pringles (in the U.S. Pringles is a preformed potato chip). Throw away the chips if you expect them to taste like potato chips. Print out the nose cone, nose cone parachute lug, fins, and the motor can pieces. Use…
Recycler les couvercles de boite de pringles ou similaire, en boite de rangement avec couvercle et fond transparent. Impression rapide et peut de fil utilisé
Never struggle to reach the bottom of the stack again. This attachment is a functional tray designed specifically for the Pringles Protector system, making it easier for users with larger hands to retrieve chips without tipping the entire…
DE Der Deckel ist sehr einfach zu drucken. Der Magnet 10x2wird einfach in die Öffnung hineingepresst, fertig. EN The Lid is very easy to print. The 10x2 magnet is simply pressed into the opening and that's it.
Use two of these connectors (one at the top, one at the bottom) to combine three empty Pringles cans to form a triangular storage space. Holds aluminium foil, cables, paper scrolls, half liter bottles, cans, pens, pants, cutlery... Add…
Re-housing $5 Bluetooth speaker from dollar store using short Pringles tube. This design also improves the sound quality of the original speaker a little. https://youtube.com/shorts/UvyRI9fbN-A?feature=share Assembly You will need some…
helps get the chips out of the pringles can. just stick it the in the can, put the can sideways and pull!
What's worse than a slimy bar of soap? Soggy potato chips. Especially while snacking in the shower. Dish (1) with the ridges (photographed print) was my original intention. Until I flipped it over and realized the ridges were completely…
I decided to make a simple pen holder out of a pringles can, after cutting it to length I realized the exposed cut section is rather sharp and can get wet much quicker than the rest of the can, so I made a simple rim for it. just print it…
No more getting you hand stuck with this simple design
I often use mini Pringles cans as tool holders and part storage, so I wanted a way to mount them to my Multiboard. The holder should be able to flex just a little bit to get over the lip of the can and hold it securely. If the cans look a…
My friend Eric "postalshark" made this nifty lid for repurposing the Pringles snack pack containers. Recently, Eric talked me in to watching a show I quit watching after two slow drawn out episodes that didn't interest me, "Severance".…
Recently I needed some basic battery packs for 3 AAs but could not find any that were both simple and robust enough to fit my needs, so I decided to make my own. These packs will allow you to wire 3 AA batteries in series with just a 2 mm…
A simple container designed to hold a GoPro 7, 2 extra batteries, a micro SD adapter card and 5 extra micro SD cards (one in the adapter). I designed the container to fit the lid quite tightly to ensure it doesn't accidentally pop off…
I wanted to build a pen holder using a Pringles box. I needed a foot because I only wanted to use the upper part of the box.
This is a box that you could put on your pringles bluetooth speaker with less then a twist.
I present to the fine folks of Thingiverse a solution to a problem that has plagued large handed individuals since the dawn of time. Pringle tube to small for man hand, no fit. A simple twist of the patent pending self rising Pringles…
take the metal bottom out. Materials used 3x20 Printed in petg silk 3 perimiters and 25 % infill
Wouldn't you like to reuse ordinary packaging waste? What a great idea to design an airtight transport container to store your nuts or coffee beans. All you need is a Pringles can lid
Added a magnet so we can use our ducts as a drying line Friction fit 5mm diameter magnets. I stacked 3 to increase the hold. Hole is made for taking 3 2mm tall magnets Hole - 5mm by 6mm Maybe add some super glue, but mine work just as…
an egg cup designed to fit medium eggs [uk]
a semi cylinder design used to insert into the tube to pull out one stack at a time
Use this DIY upcycling gadget to turn your Pringles can into a pen holder and close it again with the original lid. Simply place the 3D-printed part onto a cut Pringles can. First use case: If you want to use the gadget like this...:…
Project is still ongoing. This experiement is to create a leg for a table from pringles cans/rolls. Connecting pieces are superglued to the inside of the can, then the inner part is filled with PUR foam. PUR is using water to harden so…
A fun decoration for Pringles tins. Two-piece design for optimal printability. Can be assembled with or without adhesive. Further designs for modular assembly of the cylinder and rim will follow.
A truncated top of a Pringles can that will accept and seal to a Pringles lid.
This is a springless actuator for the American Lock 1100 series padlocks. Unlock the padlock Remove the screw under where the shackle locks Remove the core Close the shackle and push it down a couple of times to make the actuator and ball…
Just added fillets for easier inserting :-)
Gridfinity 2x2 storage bin designed to use a standard Pringles lid as a transparent cover. Good for hardware and small parts storage. Features Reuses Pringles lids to close the container. Available in heights from 49mm to 175mm (7u to…
This is a stand and moneybox for the Easter Egg Candy puzzle, The egg sits on the stand which has a slot for money and the base is a pringles lid. https://www.thingiverse.com/thing:5941981 I couldn't get wrapped Easter eggs chocolates to…
With this model you can convert your empty Pringles box in a spaghetti case with this lid. Includes a rotative addon to select the measure for 1, 2 or 3 people to help you . Included the f3d model so you can adapt it at your convenience…
This 3D printable Pringles can lid turns a simple snack into a thoughtful, personal present. The lid includes a built-in clip on the front where you can easily insert a gift card, letter, or paper voucher , making it ideal for birthdays,…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
pringles lid with coin slot and cash spot fits best at 83mm in diameter
Update 16.03.23 - (V7): - Reinforced handle. A Stand / Drawer / Holder for Pringles that comes in handy at a party or even a casual movie night with the family. Package Included: - a Pringles Stand: 240x70,7x55,9mm PS. - STEP files are…
A simple hook to hold a can of Pringles or any other ~3 1/8" tube on a wall. Doesn't hold a lot of weight. Material and layer height are irrelevant. 100% infill. Prints without supports. Category: Containers
Catan...in a Pringles can. First, eat a full tube of delicious Pringles, which pair nicely with a game of Catan. Next, print these Catan boardgame pieces with any standard desktop 3D printer with basic print settings. Nothin fancy, just…
Various boxes to re-use all those Pringle can lids. The SD card and battery inserts are not all that practical but thought I'd share anyway. AA V1 can be used as a standalone. Printed using 3 walls to force the rim to be solid. Printed in…
My children asked me to turn a pringles can into a toy bazooka gun and just wanted some handles for it. So naturally I took it more literally to making them a toy that could shoot paper or foam balls. Materials list : PLA or similar…
Convert your empty pringles tube into a candy jar for Halloween Enable supports everywhere
Clean up your desk and upcycle your empty snack cans into the ultimate pencil holder! This Modular Honeycomb Ring Matrix is an eco-friendly project designed to snap empty Pringles cans together into a heavy-duty, completely expandable…
Turn your Costco XXL Pringles can into a fun and functional storage container! This project repurposes the large XXL Pringles can into a pull-out storage system. The printed mount fits around the can, while the internal tray slides out…
Pringles sized container with a lid
Large Pringle tray sealable, with flat edge for tray dispensing position and anti rolling. Printed on food safe PLA at 0.20 layer height no infill
Protect your stack from "unauthorized snacking" with the Pringles Protector . This functional cryptex-style lock fits precisely over a standard Pringles tube. Using a mechanical stop, the bottom sleeve traps the can's top lip, making it…
