1 / 3
Springless-LED Strip Solder Staion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a solder station I designed for neopixel strips that does not need springs
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 129
- Makes
- 0
- Views
- 627
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed a solder station for led strips for my Voron 2.4, and didn't want to have to source springs for the currently available models. There are 2 variants of the arms, one with channels for wires the other is flat, both work just fine for both the strip and the wires. All you will need for this is 2x M3x20 bolts.
These are printed in KVP ABS but I assume PETG would be fine as well. I used 3 walls/top and bottom layers, 25% gyroid infill, and no brim.