One‑Piece Springless Clothes Peg
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.28 – €0.34 net (excluding VAT)
For file: Peg_PLA_30m47s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.31 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 18 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a compact, springless clothes peg / laundry clip designed as a single printed part.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 1
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Tired of pegs that rust, snap, or vanish into the mystery drawer? This little clip keeps things simple. It is a one-piece design that flexes where it should and holds when it counts. The tapered jaws grab thin fabrics easily, the long side slots add flex for an easy squeeze, and the scalloped grips with a ribbed pad make it comfy for all hand sizes. Rounded edges are kinder to your clothes and to your fingers.
There is also a round hole near the bridge if you want to hang it on a hook or add a lanyard. Print a bunch in your favorite colors and make laundry day a little brighter.
Quick specs
Size: 80 × 20 × 5 mm (L × W × T)
Style: springless, one piece, print in place
Features: tapered jaws, long flex slots, scalloped grips, ribbed finger pad, rounded corners
Print it like this
Orientation: flat on the bed, ribbed pad facing up
Layer height: around 0.20 mm
Walls: 4
Infill: 40 to 60 percent (go higher for a stiffer clamp)
Supports: none
Brim: optional if your plate is very smooth
Material tips
PETG or ASA for outdoor use and sun
PLA or PLA+ for indoor use or mild weather