Counting matching models…
I came up with this simple and quick yet strong 3d printed peg which doesnt require any assembly, one has smooth jaws and other one has small teeth. I strongly recommend print with PETG as the spring from PLA doesnt really hold up that…
You can either print the hanger or use the hook with a string attached if you need a longer length than the hanger allows. Model created to fit 220 mm printers I provide the freecad model if you want to make changes.
01_Прищепка филамент Приспособление для фиксации двух прутков пластика в катушке между собой. Удобно использовать на катушке с малым расходом филамента и дополняет изделие 00_Клипса филамент . Изделие оптимизировано для сопла 0.5, 0.4.…
Versión 2.0, es más delgada, más larga y se adapta mejor a los muelles. Impresa en PETG. Capa inicial 0,3 resto de capas 0,25. 15% relleno Version 2.0, it is thinner, longer and fits better on the springs. Printed in PETG. Initial layer…
You can either print the hanger or use the hook with a string attached if you need a longer length than the hanger allows. Model created to fit 220 mm printers I provide the freecad model if you want to make changes.
01_Прищепка филамент Приспособление для фиксации двух прутков пластика в катушке между собой. Удобно использовать на катушке с малым расходом филамента и дополняет изделие 00_Клипса филамент . Изделие оптимизировано для сопла 0.5, 0.4.…
This model is a variation of the Clothes Peg by Slade1972. The goal was to optimize the clipping options, providing an extra option. PETG is good for indoor, but ASA would be even better for outdoor use - I think PLA would work for some…
Print-in-Place Clothespin Simple print-in-place clothespin with an integrated spring mechanism. The model is designed as a one-piece print without assembly. It was created and tested mainly for PETG. PLA is also possible, but the printed…
Clothes pin for hanging things from an RV/camper awning rail. Remixed from Heiho's Clothespin for piping rail, as the rail adapter was too small to fit the awning rail on my Jayco brand camper. Print Settings Printer Brand: Creality…
Since I couldn't order my favorite italian clothpegs in my country, I played a bit with bezier curves in openscad, made a terrible quick and dirty scad file but the thing works for me. Edit (21/02/18): Just improved the openSCAD file…
A simple and fun Clothespin carrier in the shape of a Cablecar (inspired by the Cabina peg holder by Avichai Tadmor). Super easy to print and fun to build. See build instructions and photos if you want to print it in 2 colors but it also…
Versión 2.0, es más delgada, más larga y se adapta mejor a los muelles. Impresa en PETG. Capa inicial 0,3 resto de capas 0,25. 15% relleno Version 2.0, it is thinner, longer and fits better on the springs. Printed in PETG. Initial layer…
3 tension strengths: Utilizing one, two, or no tension blocks, the inserts compress the spring, applying a preloaded force to the tips of the clip for optimal performance.
Designed this on shapr3D on iPad. I's a clothespin with a classic shape. No metal spring needed. 100% Printable. As requested I'm uploading a second version with a thicker body where you push it open with the fingers. Print instructions:…
Original: https://www.prusaprinters.org/prints/46765-clothes-peg-kolicek-na-pradlo
Basket for clothespins. Print Settings Printer Brand: Flsun Printer: Flsun Super Racer **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.2 Infill: 50 How I Designed This =================== Freecad Project in download section…
See detailed information here: https://www.printables.com/model/512158-print-in-place-clothespinclamp
I want to use these a chip bag clips, so I made a holder to keep them on the inside of my cupboard door. step file included if you want to make changes
Added a small dimple in the hole for the metal spring, so it is better retained. It is a tight fit, use a clamp.
I designed this clothespin that can be used on various garments as well as for clothes. The presence of some raised lines allows for a good non-slip grip during use. Printing tips: Material: PETG (for its elasticity and outdoor…
My girlfriend ask me to make a improvement model, because old drying rack clips are quite weak in use and break a part after short time of clipping.. Support (maybe) needed under the “mushroom” in part 1
My wife and daughters use reusable cotton pads, so I looked for a solution to dry them easily without them falling off t
I love Benchy but I always feel guilty printing stuff that doesn't have a use. Now, I can hang my clothes with it!
Matière : PLA, PETG, ABS Remplissage : 15% type de remplissage : peu importe Mur : 2 hauteur de couche : 0.2mm Support : non
Matière : PLA, PETG, ABS Remplissage : 15% type de remplissage : peu importe Mur : 2 hauteur de couche : 0.2mm Support : oui
Clothespin or Foodbag clip total lenght of clip is 7,2cm Print with PETG
Please click if you appreciate my work :) Clothespins for 3D printing Print with 4 layers of walls, Layer Height: 0.3mm Use PLA Gcode for: -BambuLab A1 -BambuLab A1 mini -BambuLab P1P -BambuLab P1S -Prusa MINI/MINI+ -Prusa MK4S -Prusa…
I have a foldable resin clothes rack that goes outside. To store the clothespin, I bought a basket to put them in. At first, I just tied the basket to the rack, but sometime I needed to fold the rack and I got to untied the basket and it…
These are two jigs for engraving Clothespins and the SVG-templates to create the engraving-files. The small one can fit Clothespins with a 74x10mm Footprint, the big one fits 73x18mm. I'm not sure about the big ones, but the small ones I…
I just took out some of the unnecessary curves. Update1: Enclosed the hole at the bottom to keep the spring in place. (untested) Category: Toys & Games
To finish this model you do need the other part of the clothespin (which you could steal from your mom or just print out), some glue and the spring. When finished its a great tool to hold things still when you need to do precise things…
This is a spring clamp that uses the spring of a standard clothespin. It is just like a regular clothespin but with bigger jaws and small pivoting surfaces for better grip. There are three STL models, with varying jaw length. You will…
I have a Vileda XL clothes air dryer that features tubes/rails instead of clotheslines, and I couldn't find any pegs online or in stores that are wide enough to fit. Additionally, the dryer features an extendable design, allowing for two…
I designed an universal wood clamp adapter for the xTool F1. It's tested with (Birch) clothespins insert 75 mm https://amzn.eu/d/6r05zy6 and Bambus clothespins. It can be used in both directions.
This is my version of a simple, effective and easy-to-use clothespin. It can be used on a standard laundry rack e.g. IKEA with a diameter of around 3mm. Conventional clothespins often leave marks on clothing, but this one is gentle and…
A very simple bag clip for quickly closing bags that anyone can use in the kitchen. The clip is universally applicable, for example, as a clothespin. It is available in five different sizes: size XS 1,05g size S 1,91g size M 3,68g size L…
Remix, for 8x3 magnets (and a drop of glue, depending on your printer's accuracy).
The regular clothespins aren't really UV resistant :-( Printed new ones from ASA reusing the original springs.
Top part of a clothespin basket, I needed to repair. I will add the lower part in the future
simple magnetic clothespin Insert 2 magnets with a diameter of 10 mm x 3 mm or 15 mm x 3 mm possibly add 2 drops of glue
A clothespin inspired hanger to hang photos or papers on our office divider walls. To combine the 2 printed pieces you need the spring from a regular clothespin. 15/8/2022: Added a custom version for Jan t Hart
To combine the 2 printed pieces you need the spring from a regular clothespin.
A durable clothespin designed to be printed in PETG. PETG provides improved toughness and flexibility compared to PLA, making the clip suitable for repeated use. The model requires supports during printing and can be scaled depending on…
One-piece clothespin printed in PETG without a metal spring. The clamping force comes from the flexible spring geometry. Supports are only needed for the spring area.
A single piece clothespin or clothes-peg. Category: Household Supplies
I recently published a modular holder system working as a very versatile 3rd hand for any delicate task you may encounter: Video , 3D files Here you will find the files for the various versions of clips I designed using clothespin…
This model is a variation of the Clothes Peg by Slade1972. The goal was to optimize the clipping options, providing an extra option. PETG is good for indoor, but ASA would be even better for outdoor use - I think PLA would work for some…
Print-in-Place Clothespin Simple print-in-place clothespin with an integrated spring mechanism. The model is designed as a one-piece print without assembly. It was created and tested mainly for PETG. PLA is also possible, but the printed…
3D printable clothespin Do not align the seams over the spring ring Material: PTEG Supports: Yes Walls:2 mm
General IKEA has great ideas, like the mini octopus rotary clothes dryer, called ‘PRESSA’. However, the plastic clothespins on that design have a ‘hinge’ that tends to break. Use this model to replace the broken part. Just use the…
Introduction Ever wanted to wear a giant clothespin in your hair ? Now you can! This oversized clothespin hair clip is a fun and eye-catching accessory. It assembles with just a few rubber bands and requires no additional hardware. While…
Print in place model. Note, for some reason it needs to be flattened to the bed plate manually, then it doesn't need any supports then.
I use various clothespins around the kitchen as clips for various things and wanted a way to store them. It will hold 6 standard clothespins No Supports Default Print Profiles Variable Layer Height works well
A rail for clothespins, instead of a bag or pouch. Clips to an IKEA JÄLL drying rack and others. Recommended print settings Supports are optional. If your filament droops a lot: enable on build plate only and uncheck remove small…
Boat clothespins for boat rails. 7/8 inch, 1 inch, and 1 1/8 inch. print using PETG, 4 walls.
Upgrade your household, office, or workshop with this exceptionally strong, fully 3D-printable clothespin. Engineered for maximum functional utility, this print-in-place design features a highly robust internal flexure spring mechanism…
I made the model for replacing broken clip. 11.0 x 50.9 x 12.2 mm Build: Print 2 parts (same orientation, no mirror), inserting a rounded wire end to the small hole on back side, pass wire through the hole on the other part. Print…
Remixed from Nudel_P's Bat Clothespeg. The original was too tall to use my clothespin springs. So I made it less tall and added a slot for the spring end. Also the walls around the wings were too thin and tended to not get printed, so I…
I have remix this clothespin tangs to O3D. It's thicker and wider between the clamp so it so it does not merge together when printed with ASA and ABS filaments. Happy printing. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts:…
I had to customize original project because my spring was not fitting correctly (a little bit longer). While changing it I also added some grip areas Print Settings Printer: Custom Bear 2.1 Rafts: No Supports: No Resolution: 200 Infill:…
Wiederverwenden der Feder einer alten Wäscheklammer. Die Form ist einer Zange nachgebildet. Verwendung als Wäscheklammer, Kinderspielzeug usw.
Check out my updated and improved version here . In my pantry we always reach for the clothespin style clips first. This is a very simple and easy to print model that tries to capture what makes the clothespins work better. The “armpit”…
Can be used to hook on top of curtain rod. Very handy for drying photographic film. Uses half of a wooden clothespin.
This is a remix of Cam Rof 's File found HERE . I use it to hang Wet Motorcycling gloves, so I need it to be a bit beefier. I increased z-axis about 15% and decided to make the second piece so there was no wood to absorb water and get…
To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…
This is a clothespin for your clothes, works without a metal spring. Has a large tube dimension. If you need smaller, please contact me. I printed it in PLA and ABS, works properly. 0.2 layer, no support needed.
a simple clip for the laundry or bags. print without support in petg for more flex? squeeze and twist to bring it under permanent tension. have fun!
I've tried a number of filament clip designs, but they always get loose and floppy after repeated use. So I created this tiny clip which is meant to be used with the spring from a clothespin. I used some dollar store clothespins as spring…
Demonstration video: This is a single piece clothespin with a compliant lock mechanism that allows for a sturdy and safe hanging and clamping. Print instructions This print is optimized for PETG and does not work well with PLA for its…
This is a simple model of a very common clothespin that you can make on your 3D printer. Category: Other
Added a magnet so we can use our ducts as a drying line Friction fit 5mm diameter magnets. I stacked 3 to increase the hold. Hole is made for taking 3 2mm tall magnets Hole - 5mm by 6mm Maybe add some super glue, but mine work just as…
Keep those snacks fresh with this mini chip clip. Uses a clothespin spring and has surprisingly strong grip. Enjoy!
After a few years of use, my Ikea octopus' clothespin are starting to fail one by one. So my kids and I decided to design new ones. We went with a spring type hinge instead of a single layer of plastic to spread the load on a wider area,…
General This clip was designed to pin clothes to a bar, such as a balcony railing. It is supposed to keep the clothes from being blown off on a windy day. The included .3mf file was designed for a tight fit of a 100mm railing, but you…
Place up to 12 clothespins in the jig and hold them stable for engraving. Makes it easy to engrave names on clothespins for party nametags. Edit the SVG to use the jig. Import it in Lightburn and change the text or put images in the…
A simple and effective design, when you just miss some clothespins. No supports, no brims, no sharp edges. Available with 4 different gap sizes to suit every need. L (4mm gap) M (3mm gap) original design S (2mm gap) XS (1mm gap) Ready to…
After using it for a long time, the body of the clothespin made of ABS was broken. So I rebuilt the body to recycle the remaining metal parts. This design may be applied only to clothespins used in Korea. Printing can be done without…
Your replacement for your clothespin with spring. Here it is, a replacement for your socks clothesline clothespin comptible with two types of springs (Circular and square one). Very easy and fast print also very tough. Recommendations V1…
10 mm X 5mm round magnets print in place pressfit the magnets If you have smaller magnets, put some tape around them to fit them snugly The step file is included for remixes! extra version: clip 10mm 4 magnets the magnets in the handel…
Take a german Wäscheklammer and get the spring out of it. This works like a charm. Supports needed!
There are a lot of instructions for making a spring clothespin into a toy "gun" for shooting matchsticks or toothpicks. They work OK, but need some fiddling to get them cocked after shooting--the spring and matchstick often wedge, or the…
There are hundreds of PCB-holders and third-hand designs out there. Most of the designs are quite large and often complicated. I wanted to make a small, simple, and working tool to hold various items when soldering PCBs and similar items.…
Dimensions (LxWxH) 70 x 30 x 10 mm (100% scale) Basic information Print in place clothespin. It's designed primarily for laundry, but you can use it for many other various purposes, such as sealing bags, holding stuff together, etc.. The…
Update [2024-11-12]: Just to make clear, there are several versions to use according to printer capability: 0.20 clearance 0.35 clearance 0.50 clearance Original Also changed the position of the model, to half-open, so it is easier to…
I redesigned the model based on the original concept totally. Optimized for my availabe springs and toothpicks as ammo. All credits goes to: Source: http://www.youtube.com/watch?v=vC2BSb9MZYc Category: Mechanical Toys
This is a two part hand rail hook design to fit the standard white clothespin basket. The two parts are the top hook and the lower spacer to keep the basket in the right angle.
