1 / 3
Clothespin compatible with tubular clothes lines
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clothespin which also fits larger tube style clotheslines.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 102
- Makes
- 3
- Views
- 368
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a clothespin that would fit more than just a string line.
Tested on regular string line and tubes ranging from 2 to 17mm.
2 part design with spring to improve grip strength on thinner lines.
Supports should not be needed.
I recommend using brim ears to decrease chances of the long and thin parts from warping, unless you have a very good bed adhesion.
Printed in ASA. ABS should work without problems. PLA is untested and I suspect it might break or creep too much over time. PETG should work too, though it might grip with less force.