Clothespin compatible with tubular clothes lines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clothespin which also fits larger tube style clotheslines.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 102
- Wydruki
- 3
- Wyświetlenia
- 368
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a clothespin that would fit more than just a string line.
Tested on regular string line and tubes ranging from 2 to 17mm.
2 part design with spring to improve grip strength on thinner lines.
Supports should not be needed.
I recommend using brim ears to decrease chances of the long and thin parts from warping, unless you have a very good bed adhesion.
Printed in ASA. ABS should work without problems. PLA is untested and I suspect it might break or creep too much over time. PETG should work too, though it might grip with less force.