Liczymy pasujące modele…
Versión 2.0, es más delgada, más larga y se adapta mejor a los muelles. Impresa en PETG. Capa inicial 0,3 resto de capas 0,25. 15% relleno Version 2.0, it is thinner, longer and fits better on the springs. Printed in PETG. Initial layer…
Gedruckt aus ABS mit 4 Wandlinien, 0.4mm Linienbreite, 0.16mm Schichthöche, 20% Infill
This is a very simle print to organise your towels on the radiator. Quick installation, no drilling or gluing required. It can be easily hung Any position on the radiator at different heights and any time intervals.
A part that joins the frame sections of a dring rack. The frame rods are approximately 6mm diameter. I printed in PLA but other matrials may suit, even a stiff flex material might work. Print with the top down, basically legs pointing up.
Update 22.03.2025 The files have been updated to simplify assembly, especially when connecting the parts using filament. Additionally, the left and right top parts can now be joined with an double hinge, allowing the board to fold…
Ikea Besta Clothes rail, works with original IKEA screws Suitable for 20mm rods
Use double-sided tape or glue to fasten it down. It presses against the ball so the tape/glue is just needed to prevent it from falling off sideways and doesn't need to be very strong. I printed it without supports and had no issues. PLA…
Náhrada plastové části klasického kolíčku na prádlo. Vymodelovány byly tři varianty podle průměru střední části pružiny 5-6mm, 6-7mm a 7-8mm. Tištěno z materiálu PETG bez podpěr, výplň 50%, tloušťka vrstvy 0,2 mm.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A print-in-place foldable clothes hanger. It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds…
You can either print the hanger or use the hook with a string attached if you need a longer length than the hanger allows. Model created to fit 220 mm printers I provide the freecad model if you want to make changes.
After the old feet on our clothes airer wore through and it started scratching the floor and leaving rust stains, I designed new feet that are correctly angled to sit flat on the floor.
Replacement Horseshoe Clip for Clothes Hangers A simple replacement clip for standard plastic clothes hangers. This horseshoe-style clip slides onto the hanger's bottom bar and securely holds straps, skirts, or pants. Features: Tapered…
Replacement parts for a ceiling airer. They broke at my grandma's house so I decided to print new ones. If you're unsure about the size, just print one and check :)
Accessory for a clothes hanger, it will allow you to hang your cap, hat or scarf together with your coat. Two pieces for easy assembly, it does not require supports. The hole on the cap holder is a bit bigger than the hanger, to allow for…
I refused to buy a new clothes dryer rack just because the plastic guide broke. Instead, I got to work and recreated the same plastic part that had snapped. If you have a similar clothes dryer rack and find yourself in the same situation,…
📌 Detailed Description This practical flip-out hook consists of three parts : Wall-mounted module Hook body Hook arm 🌀 Mechanics & Function The hook flips out at a 15° angle , making it easy to hang clothing. All parts are equipped with…
Prints fast and with very little filament. I used double-sided tape to attach it to my drawer.
Missing a clothes rail holder or broke the original one? I’ve got you covered 🙂 This holder was designed to be stronger than most existing solutions , with an extended rail support area to improve strength and long-term durability. Solid…
The push pin shaped clothes hanger! It is projected to be printed in two parts, first is a screw mount. It have a hole to be screwed into the door, wall or other surface. To better hold the stuff it is tilted for 10°. But dont worry, the…
Overview This remix is of the awesome Clothes Folding Board / Shirt Folding Board . I split the panels up to fit onto a 220x220x220 print bed. The bottom panels are split in half with dovetail joints and top panels were split into four…
Don't throw away your wooden folding clothes drying rack just because a leg broke! This 3D printed repair bracket acts as a reinforcing splint that slides over the broken leg joint and is secured with a screw or dowel through the pre-made…
Perfect for Whirlpool, Indesit and Bosch Clothes Dryer. Clothes Dryer Door Close © 2026 by Bernardo Piteira is licensed under CC BY-NC 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc/4.0/
01_Прищепка филамент Приспособление для фиксации двух прутков пластика в катушке между собой. Удобно использовать на катушке с малым расходом филамента и дополняет изделие 00_Клипса филамент . Изделие оптимизировано для сопла 0.5, 0.4.…
I ran out of those cheap molded plastic hangers so I decided to design one I could quickly print out whenever I needed an extra. Of course my print bed is very small, so I had to design it in parts. I was initially going to make them…
This is a clothes pin that can be printed out of TPU. For the best print quality, I have discovered that using low print speeds and enabling "avoid crossing wall" in the slicer is usually the best option. It is simple and takes just half…
Please adjust the scaling as you need it. Bitte die skalierung so anpassen wie du sie brauchst.
Clothes hanger I made the wohle cloat hanger to fit perfectly to my bathroom wall cloat dryer. pls like
Our new washer's drain pump (Whirlpool) was way too fast for our older plumbing, and was prone to making watery messes. This gets installed at the back of the washer where the drain hose connects, and slows the drain flow just enough for…
A simple door hanger for clothes and etc. Model for doors with a width of 40 millimeters and 1 or 2 hooks.
Clothes dryer fix for 2,5mm rod and 1,2cm base stand.
This is sliding rack fixing + end pcs for other end and end plug. this model should be 17mm pipe and 5 mm wire suitable. made small change after printing, since was little loose.
Clothes hanger, train car for ticket to ride board game
A hook for clothes or bags that fits over the top of a door. The opening for the door is 35mm wide and its overall length is about 275 mm. I printed it lying on its side, with PLA, at .3mm layer height. Be sure to use a brim to avoid it…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Came across the idea in YouTube shorts: https://youtube.com/shorts/WAc9c3enG_c?is=5QsHIAaA7PG0GiS1
Fits 15x30mm oval rail Material: petg Settings: enough walls to make completely solid part
I made a thing, It is print in place and you can use a multiboard rail or fix points. I used big screw fix points that are offset from the board so it isnt flush.
Parametric under-shelf square-rod hanger brackets (left/right/pair/assembly preview). This is a printable bracket system for hanging items from a square support rod beneath a shelf. It creates a soft-rounded, clean geometry look with a…
Every solution is unnecessary, until the problem arrives. GRABTOR is a Print-In-Place clothes hanger. No assembling, no supports. Yet small enough for the tiny 180x180mm print beds. Print, unfold, and it transforms into a full size…
If you want to hang heavy things on it, it's better to print it in a larger size. It's better to secure it with double-sided tape.
Wall-mounted plastic holder designed to secure up to 7 clothesline cords. Provides clean organization of drying lines and prevents tangling or sagging. The model is compact, easy to print, and suitable for indoor or outdoor use (depending…
If you have questions I will update this modle to show how to assemble.
Replacement foot for generic clothes airers/drying racks with a 12.55mm leg diameter. This is the common model of clothes airer sold in uk supermarkets. Mine was bought in Sainsbury's, but I have seen identical models in other shops.…
This model is a variation of the Clothes Peg by Slade1972. The goal was to optimize the clipping options, providing an extra option. PETG is good for indoor, but ASA would be even better for outdoor use - I think PLA would work for some…
This is a pretty full featured over-the-door hook designed for hanging clothes, bags, or towels. The aesthetic focus of this model is the "Basket" surface texture, which was generated using the CNC Kitchen Bump Mesh tool. Works well for…
Print-in-Place Clothespin Simple print-in-place clothespin with an integrated spring mechanism. The model is designed as a one-piece print without assembly. It was created and tested mainly for PETG. PLA is also possible, but the printed…
--- By now I got around to printing and building it, on my printer the tolerances were fine and it turned out quite as imagined. Technically, the adjustment/folding feature works, but i found that after setting it up as i liked it, i…
This is a simple hook for hanging your stuff on the side of the very famous and used IKEA IVAR shelf system. Although it is marked a remix because the shape is taken from an existing model for a generic wall hook, it is a redesign from…
A clothes wall hanger with five hooks. I printed this standing on it's bottom without supports
A 3 piece print for a simple castor for a clothes drying rack. I sanded the wheels so that they slide a little better and used some superglue to keep them together.
Clothes pin for hanging things from an RV/camper awning rail. Remixed from Heiho's Clothespin for piping rail, as the rail adapter was too small to fit the awning rail on my Jayco brand camper. Print Settings Printer Brand: Creality…
1 Clothesline pivot needs 1 Thread lock. done in .2mm layer height. .4 nozzle
A simple hook for hanging up more clothes. There are two versions, one shorter which is meant to fit A1 Mini buildplate. Each hook has a adjustable print in place joint.
Ganchitos para colgar las perchas en la soga y aprovechar al maximo la soga para colgar la ropa impreso en 0.2 y relleno del 20% sin sopertes
Handle for pulling the rope on our outdoor clothes dryer. Ersatzgriff für unsere Leifheit Wäschespinne, da der alte nach Jahren zerbröselt ist. The model from the picture is the normal one.
Since I couldn't order my favorite italian clothpegs in my country, I played a bit with bezier curves in openscad, made a terrible quick and dirty scad file but the thing works for me. Edit (21/02/18): Just improved the openSCAD file…
This 3D-printed adapter is designed to fit most mini vacuum cleaners, allowing you to use them with vacuum storage bags. Ideal for preserving food or compressing clothes for space-saving storage, this adapter ensures a secure fit and…
An ordinary clothes peg with an extra C ring to give it more spring power on griping(v1.1). It works without the ring (v1.0) but the grip is kind of weaker like all other print in place peg. I print with Ender v3 se, with horizontal…
use with https://www.prusaprinters.org/prints/100789-clip-clothes-adaptor
The factory ends for the 5-in-1 clothes hanger aren't very strong. This is a replacement that snaps in. Designed in OpenSCAD, printed on Prusa MK3. Print in ABS!!
clamp to adapt generic 4" vent hose to a fisher and paykel clothes dryer
Super strong clothes rack with 20x20 profiles =) I used 2 similar extendable clothes rack similar like this one (but not exact this one!) before. Within 2 years both broke, because they both simply bend off the wall after about 1.5 and 2…
A simple and fun Clothespin carrier in the shape of a Cablecar (inspired by the Cabina peg holder by Avichai Tadmor). Super easy to print and fun to build. See build instructions and photos if you want to print it in 2 colors but it also…
I made these for my children so that we can pick out their clothes each week and they can pick them out each morning before school. You can color coordinate or just use the M-F. Blue Monday and black Friday just seems to fit. just print,…
This practical mount is designed to attach to your bedroom desk, providing a convenient spot to hang clothes. The design features separate, easily printed hooks that can be inserted as needed, allowing for full customization of how many…
My vacuum robot sometimes got stuck on legs of clothes airer, so I decided to create a barrier preventing it to climb over the legs. This model will snap on tubes with diameter around 16mm (around 5/8 of an inch) and is 150mm long (just…
While trying to fix my old 80+ year old dryer my family needed a way to dry clothes without worrying about birds pooping on our stuff outside. The mounts were printed with a blue PETG with settings as follows: 3-4mm wall loops 40% infill…
------- How To Use ------- A cover for a clothes button that expands its diameter by 2mm. It's recommended that the shirt be buttoned up first before putting on the expander. Each model is named for the type of button it will fit over.…
Screw diameter 3 mm. Eye diameter 14 mm. For larger sizes it is possible to scale in Slicer.
Versión 2.0, es más delgada, más larga y se adapta mejor a los muelles. Impresa en PETG. Capa inicial 0,3 resto de capas 0,25. 15% relleno Version 2.0, it is thinner, longer and fits better on the springs. Printed in PETG. Initial layer…
The mechanism of tension of the clothesline (rope). This works with a clothes rope in a polyethylene sheath with a diameter of 2 mm. The turnbuckle mechanism with two opposite threads allows periodic tightening of the stretching rope over…
Foldable / collapsible clothes hanger that snaps into position. Useful for putting it into the neck of a shirt without stretching the neck; snap it into position once the arms are inserted. PLA 0.2 mm layer height 15% infill No supports,…
Purpose: We recently got a new surface for the balcony floor. This is resistant to everyday wear and tear, but we got warned that rust stains are not completely removable. So a stainless clothes drying rack became necessary. Most…
3 tension strengths: Utilizing one, two, or no tension blocks, the inserts compress the spring, applying a preloaded force to the tips of the clip for optimal performance.
Gedruckt aus ABS mit 4 Wandlinien, 0.4mm Linienbreite, 0.16mm Schichthöche, 20% Infill
Designed this on shapr3D on iPad. I's a clothespin with a classic shape. No metal spring needed. 100% Printable. As requested I'm uploading a second version with a thicker body where you push it open with the fingers. Print instructions:…
Das ist ein Ersatzteil für den IKEA Pax. Es ersetzt die Kleiderstangenhalterung die gern mal ausbricht ;) Druckt es in PETG oder einem anderen flexiblem Matierial - der Schnappmechanismus muss sich etwas bewegen können. Es handelt sich um…
Print in place no support hanger to clothes hanger. Easy to print.
![IKEA Pax Kleiderstangenhalter [Clothes rod holder]](https://media.printables.com/media/prints/10395/images/86352_da05d17d-0974-48e4-ab49-c5e30a91a323/ikea_pax_10395.jpg)
