IKEA PRESSA CLOTHESPIN REMPLACEMENT
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.56 – €0.68 net (excluding VAT)
For file: Pressa PETG 0.15mm / pressa-v20_015mm_pet_mk2s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.62 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 43.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
To replace the Ikea Pressa clothespin who's breaking all the time . My model have a pivot point for a better life span.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 215
- Makes
- 6
- Views
- 1,268
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
To replace the Ikea Pressa clothespin who's breaking all the time .
My model have a print in place pivot point for a better life span.
Print instructions
Print in one part and press ( until you hear a clic) it before use. Install the spring and hang out the washing !
Recommanded layer height 0.2 mm
Infill 40 - 60 %
3 wall loops
if you use it outdoor, its better to print in abs or good pla.