Rim for Pringles penholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I decided to make a simple pen holder out of a pringles can, after cutting it to length I realized the exposed cut…
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 1
- Views
- 237
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I decided to make a simple pen holder out of a pringles can, after cutting it to length I realized the exposed cut section is rather sharp and can get wet much quicker than the rest of the can, so I made a simple rim for it.
just print it with the slot facing upwards and then fit it onto the can.
I tried the original lid but it is a very tight fit, if you glue it down it might work with the lid.
of course, you will need to cut the can and ideally a very smooth flat cut.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
higher the better, i used 0.8 but of course you can do like 0.2
Infill:
100%
Filament: Purefil of switzerland PLA concrete gray Post-Printing =============
clean up the print and fit it onto the can starting from one side
How I Designed This
Solidworks Student
Category: Containers