1 / 5
Modular Honeycomb Pencil Holder (Pringles Can Upcycle) - Only 7g! — image 1
1 / 5

Modular Honeycomb Pencil Holder (Pringles Can Upcycle) - Only 7g!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Easy-to-print 7g interlocking honeycomb rings to link empty Pringles cans into expandable, sturdy desk organizers.

Rating
0 / 5
Likes
2
Downloads
1
Makes
0
Views
13
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

Clean up your desk and upcycle your empty snack cans into the ultimate pencil holder!

This Modular Honeycomb Ring Matrix is an eco-friendly project designed to snap empty Pringles cans together into a heavy-duty, completely expandable stationery grid. It is optimized to be incredibly lightweight, printing at exactly 7 grams of filament per ring, making it a fast, ultra-cheap addition to any student or artist workspace.

💡 Multiple Ways to Build This Model!

  • Standard Version (Full Cans): Slide standard, full-sized cans directly into the rings to build a deep, high-capacity holder for long paintbrushes, massive marker collections, or rulers.

  • Custom Cut Version: Carefully cut your empty tall cans exactly in half! This lets you recycle what you already have at home into shorter, custom-height desk slots. if you do cut then you need have rough edges so click on this link ( if no link is present the its not done yet ) to download a ring around the rough edges 

  • Mini/Grab-and-Go Version (No Cutting Needed!): Skip the scissors and use the short, small Pringles cans (40g/grab-and-go sizes) straight from the store! They have the exact same diameter and fit perfectly into this 77mm ring setup, creating low-profile slots ideal for standard pens, desk pencils, and smaller tools so they don't get buried at the bottom.

📐 The Engineering Features

This design was built to give you maximum stability while minimizing filament usage.

  • Gravity-Locking Connections: The interlocking tabs feature a built-in 0.5 to 1 mm slip tolerance. When empty, they connect smoothly. When the cans are loaded up with heavy pens, pencils, or markers, the downward weight causes the loose joints to wedge tightly against each other. Gravity locks them into place, creating a rigid tray. You can slide a cluster of 3+ cans across your desk as a single unit without the pieces separating or tipping over!

  • Perfect 77mm Clearances: Standard cans feature a flanged metal rim at the base. While a 75mm or 76mm hole will tightly jam or snap, this design uses an exact 77mm inner diameter to slide past the manufacturing variations of the can cleanly without splitting the printed plastic loops.

🛠 Slicer & Print Settings

  • Printer: Tested on a Creality Ender 3 V3 SE

  • Filament Used: Only ~7 grams per ring

  • Walls / Perimeters: 2

  • Layer Height: 0.2mm (or 0.28mm for high-speed printing)

  • Infill: 10% to 15% (Gyroid or Grid)

  • Material: Standard PLA

  • Supports: Tree supports

Assembly Tip: To prevent the pieces from binding during initial assembly, ensure all rings are resting completely flat against your table surface when sliding the side hooks into the slots!


Tags