Counting matching models…
Have you ever wished for a more personal summer breeze…? This cheeky but effective little project repurposes your leftover print fan from the MK4/MK3.9 to MK4S/MK3.9S upgrade and channels airflow right where it’s needed most. Designed to…
After summer, I found a few old bike pedals in the my toolbox. Not good for biking, but the body is still strong, anti-slip, ready to carry some weight. With a quick clean, they shine again and hold gear reliably. Included files: Default…
It’s empty! Now what? Your eSun cardboard spool is empty? ♻ Turn it into a compact storage station for your 3D printer! This design consists of a top and bottom cover plus compartments for tools and spare parts. All parts except the top…
Howdy everyone this is a model i made that converts the new nfc prusament spool into a headphone holder! it is meant to be mounted to a wall using standard wood screws or nails and it uses the cool styling of the hexagons from the spool…
Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…
Handheld tape dispenser, which is based on an empty Prusament spool or spools from other companies as well. The best fit is with the original Prusament spool and when printed using Prusament PETG settings. Other spools, such as the Sunlu…
Instead of tossing those orange prescription vials, clip them onto your Skadis board! This design fits the standard Costco diameter and handles various bottle heights. Technical Specifications: Infill: 25% Gyroid (provides great…
Introduction The 3D printed lamp business is growing. It's cool, but it creates a lot of plastic waste compared to injection molding. To reduce plastic waste, I made a design that allows you to upcycle one and a half Prusament spools per…
Upcycle your empty Prusa filament spools into a D&D miniature display stand and carrier. Features: No hardware required. 100% printable parts. Expandable. Add additional spools and parts to increase the tower height. Rotating display base…
Prusatower: A Modular Spice Carousel Don't let your empty Prusament spools go to waste. The Prusatower is a modular, twist-locking storage system that turns workshop waste into functional storage carousel. Use them as a lazy Susan or…
Introduction This model is a kinetically actuated lamp that upcycles the new Prusament spools into a modern and sleek design. The lamp turns on with a simple rolling motion of the spool and lights up from inside. It's great for bed-side…
Version2 is for an M8 threaded rod Version3 is for any 8mm diameter (wooden) rod! Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Resolution:** Adaptive 0.1 Infill: 15 Category: Household
simple print to turn an empty aluminium beverage can into an ashtray photo is printed with fuzzy skin / petg 0.6mm nozzle diameter
These small drawer organizers used to be very popular… but can be had for very cheap to free nowadays, especially if drawers are missing or broken. I found this one with a bunch of drawers missing so decided to (re)make it better than it…
I redesigned an alternative face plate for vertical use, and with 2x USB-A, 2x USB-C, modern fuses and speaker clips to easily connect test cables. So I redesigned with the following features: Double USB-A + USB-C connection using a car…
I had a bunch of Noosa Yogurt cups that I felt could be reused, rather than recycled, so I made/printed this to turn them into drawers (as seen in the 2nd picture). I think that the model could be scaled up or down to match other small…
Idea taken from here: https://makezine.com/2015/06/05/upcycled-bike-chain-becomes-funky-timepiece/ adapted for 3D printing. I built the clock around a 0.9° NEMA 17 Stepper Motor. I used an esp8266 I had laying around to drive the motor…
This keeps baby chicks from spilling their feed all over the place and uses a mason jar. I chose to print in PETG for longevity but be aware the big overhang section is 64 degrees so you will need to either use low layer height or…
I created a remix of the “Upcycled ATX Lab Bench Power Supply.” I designed my own custom front panel to include resettable fuses, making it even more versatile. To top it off, I gave the design a sleek update with smooth, rounded edges…
This is a simplified version of the original front panel, without the variable power supply, and with the banana plug and USB sockets I have.
I still had an old SFX power supply laying around and scaled the original model down to accomodate for it. Overall I adhered to the original build instructions, but performed few modifications along the way: resettable fuses (not visible…
Provides two parts that screw in place. Big knob to have good grip. Spool can turn freely with little resistance. Turn spool by hand either horizontally or vertically. Dimensions: Spools of up to 70mm height and min. diameter of 52mm may…
2025-11-28 update : added the FreeCad file, for anyone to make his/her own upcycling. The spreadsheet tells it all (in french, sorry). Only two items (cyan-colored) should be changed : the internal diameter and the cardboard thickness.…
Copper is noxious to molluscs but harmless to humans and shelties, therefore it makes a great alternative to chemical methods of slug control. But the familiar, smooth copper tape is little deterrent to the biggest hungry slugs, who…
I designed this box for 16 MicroSD cards to fit the lids from 3L apple cider jugs that I buy here in Costco (in Canada). But I also provide a 3D printed lid for people with no access to lids for upcycling. Your extrusion needs to be…
I made this one to upcycle an old CD drive, specifically the main motor from it. Most upcycled motors from shavers and similar devices run on lower voltages, which is not ideal for battery-powered machines. This one in the pictures is…
Have you ever wished for a more personal summer breeze…? This cheeky but effective little project repurposes your leftover print fan from the MK4/MK3.9 to MK4S/MK3.9S upgrade and channels airflow right where it’s needed most. Designed to…
I wanted to reuse the bottles from our tea addiction and wanted a fool proof way to get them all cut the same. Definitely didn't want them all different….. This bottle cutter removes the top from the bottom of the tea bottles with a…
A couple of caveats: The attached models are examples only. You'll need to take measurements to match the cardboard spool and filament refill you have. This is experimental. For all I know, the damn thing could fall apart after I use it…
Simple cover for carton roles. This example was printed with a layer of 0.2 in PETG. Easy to print.
After summer, I found a few old bike pedals in the my toolbox. Not good for biking, but the body is still strong, anti-slip, ready to carry some weight. With a quick clean, they shine again and hold gear reliably. Included files: Default…
Title: The Upcycled Cup Bug Catcher - A Humane Catch-and-Release Tool Description: Hate finding spiders or other bugs in your house, but don't want to squish them? This simple, 3D printed handle turns a standard large fast-food cup into…
At the workshop we've been seeing a lot of heavy use on the laser cutter recently so there's been a couple of laser tubes that have been worn out. They look too cool to throw away though so I've made this lamp design to make better use of…
To use this you simply cut the top of the can to your desired length. Then apply glue to the 3d printed holder and attach the two pieces. There are 2 prints here. The holder is one that I have made, and the universal attachment hook is…
Upcycle your Prusament spool sides into a lamp that looks like a full filament spool! I had the idea to create a lamp from the leftover Prusament spool sides. The goal was to make the lamp assembly as easy as possible for everyone using…
Disclaimer As with any DIY project (electronics or otherwise), you are responsible for the pain and suffering your creations may cause you, as well as the inevitable existential crises they will have once you gift them the curse of…
Upcycled toy for a spool cat toy. I have tried it on empty Prusament spools and Matterhackers MH build spools. The rings snap into place with no hardware required. It leaves about a 28mm gap in the middle for the cat to get to the ball.…
This simple quick print connects a two liter bottle into a tray/holder once the bottle bottom is cut off then halved. This connecter also keeps the holders level stopping the bottle from rocking back and forth. I recommend a 0.4mm nozzle…
Whether you are on offense or defense, the AWUC has your back. Adjustable weight feature ensures you don't dish more than deserved. You can EVEN leave it empty for fun and exciting battles. The AWUC is Simple! Print Fill a bottle with…
Dartboard Level (UniFi Recycle) A simple, precise tool to help you perfectly align your dartboard setup. This design is specifically engineered to upcycle the small, loose spirit bubble levels that come included with Ubiquiti UniFi…
It’s empty! Now what? Your eSun cardboard spool is empty? ♻ Turn it into a compact storage station for your 3D printer! This design consists of a top and bottom cover plus compartments for tools and spare parts. All parts except the top…
This magnetic stirrer is built around a recycled standard 70mm PC fan . The model is designed as a screw-together assembly where, once finished, the 5.5mm × 2.5mm jack locks into the housing in a form-fit way. To ensure durability in a…
This design aims to convert a quite fancy AOC monitor stand into a tablet and phone stand . Shown on pictures are Galaxy Tab S7 (11") and Galaxy Tab A7 (10.4"). The mounting plate snaps-in onto the stand, making it easily removable.…
PETG - recomended (for use in a car). Or PLA for home use. 2 walls 0.2mm 15% infill With support STEP file Included.
I need a desk organizer for my work table that could support a mix of everything, pens, small screwdrivers, measuring instruments, scissors, brushes you name it. I couldt find a good one so i made my own in a nice voronoi design as well.…
💀 Illuminated Skull Lamp – Prusament Spool Upcycle Give your empty Prusament spool a second life as part of a striking illuminated skull lamp. This project combines a decorative skull model with the functional reuse of a Prusament spool…
Howdy everyone this is a model i made that converts the new nfc prusament spool into a headphone holder! it is meant to be mounted to a wall using standard wood screws or nails and it uses the cool styling of the hexagons from the spool…
Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…
Turn your old iMac G4 case and “neck” into a cool desk lamp. You need to take apart the case and neck from the monitor. Keep the screws as you will need them for assembling the lamp. Parts required: 2 curtain rod rings similar to…
Don't let your empty New Prusa filament spools gather dust or head to the landfill. Transform them into rugged, functional wheels for your next maker project with this easy-to-install 3D printed kit (model fits on any PRUSA MK’ series)…
This project turns a Prusament spool side into a functional armrest table for sofas. A simple insert fills the center hole of the spool, creating a flat and usable surface. A second part acts as an adjustable support profile, allowing the…
Perfect for an evening with friends! Easy-to-print sauce and dip roulette. The outer ring is mounted on bearings and rotates smoothly. The middle section does not rotate. The middle insert can be removed for easier filling. I bought the…
A stand for 3D prints, just using a empty filament spool as storage. It is a modular design that repurposes the spool's core as a functional storage system or a kinetic mechanical display. Turn the model upside down before printing. Happy…
Handheld tape dispenser, which is based on an empty Prusament spool or spools from other companies as well. The best fit is with the original Prusament spool and when printed using Prusament PETG settings. Other spools, such as the Sunlu…
Instead of tossing those orange prescription vials, clip them onto your Skadis board! This design fits the standard Costco diameter and handles various bottle heights. Technical Specifications: Infill: 25% Gyroid (provides great…
🎨 PrusArt: The Hex-Modular Artist Station Turn your empty Prusament spool into a fully modular artist workstation. PrusArt snaps directly into the spool's hex pattern — no glue, no screws, no tools. Build your perfect setup and…
Introduction The 3D printed lamp business is growing. It's cool, but it creates a lot of plastic waste compared to injection molding. To reduce plastic waste, I made a design that allows you to upcycle one and a half Prusament spools per…
Upcycle your empty Prusa filament spools into a D&D miniature display stand and carrier. Features: No hardware required. 100% printable parts. Expandable. Add additional spools and parts to increase the tower height. Rotating display base…
Prusatower: A Modular Spice Carousel Don't let your empty Prusament spools go to waste. The Prusatower is a modular, twist-locking storage system that turns workshop waste into functional storage carousel. Use them as a lazy Susan or…
Introduction This model is a kinetically actuated lamp that upcycles the new Prusament spools into a modern and sleek design. The lamp turns on with a simple rolling motion of the spool and lights up from inside. It's great for bed-side…
This is a pet project I have been working on for a while. You can get more insight here: The build for the CoreCassettee is relatively straightforward, however, you will need some additional things aside from the leftovers of the…
Introduction The 3D printed lamp business is growing. It's cool, but it creates a lot of plastic waste compared to injection molding. To reduce plastic waste, I made a design that allows you to upcycle one and a half Prusament spools per…
Tento projekt dokonale vystihuje podstatu upcyclingu s lehkou dávkou trpělivosti. Samotný 3D tisk tohoto elegantního černého madla totiž trvá podstatně déle než bleskové snězení obou lahodných dezertů ze sady. Čekání na dokončení tisku se…
Make a usefull thing out of your old or favorite book, without destroying the book. Create on the fly a second level table for storage, temporary or for longer, or use it as a decorative furniture. Its all depends on the book you use. It…
Idea We recently moved to a new place and are still in the process of decorating. During our search we stumbled on a great deal for an IKEA desk. Unfortunately, we didn't need the legs in our setup but it still felt wasteful to throw it…
In these mini containers you can put, for example, nozzles, washers, small screws, nuts etc. Three dimensions from 10,15 2 20mm high, both open and closed (the open ones for example I use them to contain the silica gel). The caps are…
These printed inserts can be put into old tin cans that might otherwise end up in the trash or recycling to convert them into functional, fashionable planters. There are two different sizes, one for standard 15oz. vegetable/soup cans and…
Why not upcycle a used tin can to create a water-regulating 3D printed plant pot? Start by using a can opener to remove the top and bottom of a typical soup/vegetable can. Stackable cans with rounded bases probably won’t work for this.…
Upcycle your carton roles to get a toy quiver; Additional you need two empty carton roles, stripes of a tape and a shoelace Easy to print, no supports needed.
I use the empty pumpsprays from the Balea Men deodorant for isopropanol. This is a holder for it. It is attached to the Desk using Tesa Powerstrips. Printed with no support, in DasFilament Blue Pearl PLA with 0,4mm CHT Nozzle and 0,2mm…
My wife has a superpower of smell, and thus asks me to change filters in her car very often. I re-use them within an Ikea Pax enclosure of my Prusa i3 MK3. The air is drawn from the top by a 120 fan. I use this one, as it is quiet and…
Currently I have created 10 containers of different shapes and sizes. They all have one thing in common. 'PRINGLE' - clear flexible lid will fit them ALL tightly . NOW with stacking ring see below. Unfortunately most of us cannot print a…
This will help you to upcycle your old spools to masterspools. I made this for the refill spools dasfilament.de is providing. Here is there design to print the entire spool:…
An organizer cup upcycled from the eSun refill cardboard core. Only a one hour print with ‘0.2mm strength’ settings on the Bambu Lab X1C for one base and mid piece. Use one core for a short cup, two for a tall cup, Or three for a looong…
Warning! Seems like the Refills have a smaller inner Diameter than the old Spools and therefor the Refills from DasFilament do not fit on the modified Spools. Sorry for everybody who printed this Design and had to notice this flaw. I will…
Keep yourself cool in summer with the help of PRUSAVENT ! The next heatwave is coming, you'd better be prepared! PRUSAVENT is an upcycled Desk Cooling Fan which reuses all parts of an empty Prusament spool. Oh, you're also having a 140mm…
A car for Barbies or other similar dolls made using a filament box and empty spool made by my daughter. Her Grandpa and Dad helped with the 3d printed parts. She loves to upcycle, making clothes for her dolls out of toilet paper and…
This is a document scanner (or document camera), made by ‘upcycling’ an old phone (Samsung Galaxy S3 Neo, which comes with an 8 megapixel camera on its rear) and a surplus monitor stand (left over from a Dell monitor that is now attached…
Need a fun household game you can make yourself? How about a 3D printed disc golf hole? This project uses 3D printed parts, an empty Prusament spool, an empty Prusament box, and an empty paper towel roll to make a disc golf hole. This…
Holder for headphones that fits on top of a beer bottle like the Corona bottle in this case. You can either have it just balance with no problem or glue the holder to the bottle with super glue or epoxy. Tested with the Steelseries arctis…
This is a practical bird feeder built using a Prusament spool flange and upcycled plastic bottles — Snapple and Ocean Spray both work. The Snapple version threads right in. For Ocean Spray bottles, I added a new adapter printed in…
I printed it with a 0.6 nozzle, 0.4 layer height. For one of the cover you need support material (Cover with metal).
I needed 2 low benches. I had a few old kitchen cabinet doors, old curtain rod (27mm-bit more than 1 inch diameter) and some textile scraps. And voila a bench design. I designed the bench to be 250 mm high and the legs to be angled and…
Upcycle Old Lithium Ion Battery by converting them to AA form factor (with f3d) This project is only for people that has a good understanding of electronics, voltage, and power requirements of devices. It is easy to get it wrong and…
Upcycle Old Lithium Ion Battery by converting them to AA form factor (Modular Version)(with f3d) This project is only for people that has a good understanding of electronics, voltage, and power requirements of devices. It is easy to get…
It's always a bit frustrating to use a bunch of pretty filament for supports that just get thrown away. When printing my Wobbly Weeblefly cat toy the other day, I noticed that the grid supports I pulled off the base of the egg actually…
Feed wild birds with this bird feeder that attaches to a 2 or 1.89 (64oz) liter bottle. rivet a chain to a bottle for a secure hold. I also attached a 2 and 1.89 liter bottle funnel. Use no top or bottom layers and a high infill (75%+) to…
A tiny and potable greenhouse. Plant your fav veggies and see them become big and strong!
I've done these with Sardine tins and I saw these cool Anchovy tins, yes, the contents where delightful and PERFECTLY Keto and or Carnivore! LOL. Anyway, simple to print, flat side down. I use PLA at 20% fill with 3 walls. Enjoy!
The general idea how to build this shelf can be seen on the pictures, the concept is to print 2 sets which will be combined by wooden sticks (4mm diameter) to provide 2 points of support for the glasses. If any parts you would like to see…
Got an empty filament spool? Got an ever expanding Benchy fleet awkwardly displayed? This spinning Benchy display will hold 22 models. *This design fits the standard 200mm (outside diameter) x 90mm (inside diameter) spools. It will work…
Printed out of ASA material to widstand the suns heat and UV light. Printed without supports. Used a standard 5L Clear Rectangular PET Bottles With a neck diameter of 48mm. Inspired by:…
I draw and tattoo my design and a friend asked if I do it with the machine I made. I thought to myself what a great idea and why not make a tattoo machine from some leftover electronics I have left in my house especially as I wanted one…
The provided stencil is designed for the FedEx Padded Pak, but don't hesitate to personalise it and mark your spots according to your preferences. Suggested print settings: Layer height 0.2mm. Infill 15%. No supports are needed. If you…
Two ways to repurpose a broken Ikea lamp (precursor lamp to NÄVLINGE). I've printed it in PLA, but material here isn't all that important.
I like the Upcycled Starbucks Candy Dispenser by Whopper Printing . It has just one issue….The candy likes to jump out of the tray. So i designed this little door that you can glue into it. Use a length of filament for the hinge pin.…
I created simple alternative versions of the lid and the IO shield of the original Ouya console in order to repurpose the console housing as an organizing bin. In my case I use it to collect spent batteries but I have included the CAD…
These are pretty quick prints that get combined with a 408 bearing to turn a filament spool half into a lazy susan of turn table. The models let you turn a 3DSolutech 3 part spool into a nice painting turntable. Optional cover for the top…
![[UPCYCLE] Prusatower: A Modular Spice Carousel](https://media.printables.com/media/prints/9a5b61f6-aba2-49d3-8477-7f659f9e2ef9/images/12794760_1040d8a1-71bd-4445-97d0-3ffc2243550f_51098a7b-446b-4c3a-b538-ce1a0158bb56/your-paragraph-text.png)
