Cardboard spool upcycled container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Save the center of your cardboard spools for this fast storage solution!
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 55
- Makes
- 0
- Views
- 986
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- GNU General Public License v2.0
These are quick prints only taking about 20g of filament per container. A great use of those remnant spools you have collecting dust.
the lid can be printed normally. The base was designed to print in vase mode. Be sure to use at least 3 bottom layers in your slicer.
To assemble peel the sides off of your spool and clean up any bits of loose paper remaining. take the base print and apply a small amount of ca glue to the side wall. press it into the tube and you are done!
The initial models are sized to fit the elegoo cardboard spools, if you would like another brands cardboard spool adapted drop a comment and I'll see what I can do!