1 / 4
Astra Lumafloris - Lamp with upcycled Prusament spools — image 1
1 / 4

Astra Lumafloris - Lamp with upcycled Prusament spools

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printed lamp made with upcycled prusament spools. Works with both old and new spools design.

Rating
0 / 5
Likes
10
Downloads
14
Makes
0
Views
194
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

Introduction

The 3D printed lamp business is growing. It's cool, but it creates a lot of plastic waste compared to injection molding. To reduce plastic waste, I made a design that allows you to upcycle one and a half Prusament spools per lamp. You only need to add unprintable electrical hardware.

BOM - Printed parts


- 1x Base
- 1x Base_with_thread
- 3x Block
- 3x Clip
- 3x Cover_Outside (optional, only for older version of Prusament spool)
- 3x Cover_Inside (optional, only for older version of Prusament spool)

BOM - non printed parts:


- 1x Bulb socket with cord and plug
- 1x Bulb

Printing settings

I recommend using PET-G for printing due to its thermal resistance. Also, I highly recommend using only LED bulbs because they create less heat than traditional bulbs.
Brim is required for printing Bases. Inverted "pyramid" shape causes wrapping corners. You can print without brim if first layer adhesion on your buildplate is really high.

Settings that I used:

Setting

Value

Nozzle

0.4

Layer height

0.16mm

Walls

3

Infill

20% rectangular

Support

Only for Block.3mf

Brim

Yes, 5mm


Assembly manual:

Assembly manual for optional side covers (only for old Prusament spool):

The best way to cut that hole is using a rotary tool with a proper cutting disk. As long as the hole diameter is between 90mm and 100mm, every imperfection will be covered from both sides.
I cut mine on a CO2 laser with high power and low speed. Since the Prusament spool is made from material that is not "CO2 Laser friendly," I had to cut some bridges by hand.

Disclaimers

Please use the "add text" option in the slicer of your choice and add the material symbol according to local laws about product safety and recycling.

If you are interested in commercial licence of this design, write me a DM.

Tags