1 / 3
Dartboard Level Tool - Upcycled UniFi Spirit Level — image 1
1 / 3

Dartboard Level Tool - Upcycled UniFi Spirit Level

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple tool to align your dartboard setup. Upcycles the spare UniFi spirit levels included with your gear!

Rating
0 / 5
Likes
5
Downloads
13
Makes
0
Views
171
Reviews
0

Updated at source:

Model information

License
Open Community License v1

Dartboard Level (UniFi Recycle)

A simple, precise tool to help you perfectly align your dartboard setup. This design is specifically engineered to upcycle the small, loose spirit bubble levels that come included with Ubiquiti UniFi equipment (like Access Points and mounting kits), which often go to waste.

♻ The Idea

If you are a homelab enthusiast or fan of a good network, you probably have a drawer full of these small levels. Instead of throwing them away, snap one into this print to create a leveling tool for your darts board.

🖨 Print Settings

  • Printer: Tested on Bambu Lab P1S

  • Profile: 0.2mm Standard

  • Wall Generator: Arachne (Highly Recommended) 

  • Material: PLA or PETG

  • Infill: 15% Grid/Gyroid 

  • Supports: No supports needed if printed flat.

⚠ Note on Fit: The slot for the spirit level is designed to be a tight friction fit so the bubble doesn't fall out during use. If you find it too tight on your specific printer, you can try enabling "XY Hole Compensation" (0.1mm) in your slicer or lightly sanding the inside of the printed clip. In theory scaling up the model a bit should also work if the proportions stay the same. 

Tags