Counting matching models…
A 3 X 3 grid of 1 layer high squares for checking that the bed is level. To be used when performing Bed Level Correction as described in https://help.prusa3d.com/en/article/bed-level-correction_2267 . Print instructions PrusaSlicer's…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
I simply took the STL file from the Prusa Knowledge Base and reworked it to fit the print bed size of the Prusa Mini. https://help.prusa3d.com/en/article/bed-level-correction_2267 Important Information about sheet markings FAQ Sheet…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
The original author of this test contacted Creality directly to get this bed leveling test. He also created a video testing the bed leveling and showing all the findings:
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
Bed Level Correction Calibration Model for the Prusa Mk3/S. Instructions how to calibrate, see: https://help.prusa3d.com/article/TPGip0OmaP-bed-level-correction
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Used to level my Creality Ender 3, with a 235x235 HotBed, but can also be used to level other printers.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
You can see in the pictures how to set it up. I used used seven 3,0mm x 16mm wood screws. The G-Code is made for Filamentum PLA. If you want to slice it yourself, make sure to set “Loops” at the “Skirt” settings to 0. The print needs the…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
I made my own first layer calibration with a bigger center square and horizontal infill and 45 degrees infill for the corner and side squares. This way you can easiely dial in your live z for the center and look at the difference early.…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
I needed a shelf to hold my 1m level and long ruler in the garage, so I quickly modelled these C-shape brackets to do the job. For my purpose, I used 3 of them, but more or less would work just as well. They are strong enough when printed…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
I used JSN-SR04T waterproof ultrasonic sensor to calculate the water level in a water tank. The idea is to calculate the distance to the water level and use that number to calculate the volume of water inside the tank. The sensor is…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Remix of famous Batman, but in stl format and with text on it. So you can do differents checks at once!
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
The standard bed level correction procedure can be very time consuming and tedious. This calibration sheet is designed to be used in combination with a conventional flatbed document scanner. The line widths are analyzed on the scanned…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
I am adding some pegboards to my workshop area, and I'd like them to be good and level. To that end, I figured it'd be best to find an easy way to attach a spirit level to the board while I work to get it mounted to the wall. I designed a…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
I just made something to help me level kitchen Made 3 layers for calibrate. I dont mesured it so its youst layers. Base is 15mm
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
I sometimes like to play with my controllers laying on a table or desk, and I didn't care for the natural angle the Switch 2 JoyCon2 Grip leans down and away. After modeling a few variations, I also realized this could look like a tongue,…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
I designed these bed leveling knobs to add a bit of a touch up to my Anycubic i3 Mega S. In addition, the print bed can be better adjusted due to the better grip. You only need M3 thread inserts and the appropriate soldering iron…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
Nastavitelná noha pro stůl. Nohu lze prodloužit o 1 až 10 cm. Použitý materiál PETG. U výsuvné nohy je použita výplň 3D plástev. Adjustable PETG table foot (1-10cm). 3D honeycomb infill for extra strength. Fixes wobbling on uneven floors.
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for PETGSource material: PET
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
A simple bed-level test to make sure that your printer is leveled correctly !!only print one layer!!
Version 2 now available! Featuring thicker arms! Released along side the original HomeGrown3D newsletter! HomeGrown3D.com Read our article about the version 2 clips:…
If you encounter significant variations in bed level, especially in one of the corners, consider printing these shims and placing them under the bed supports. By doing so, your bed level will greatly improve and become easier to adjust.…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
A quick bed levelling test print for the Ender 3 V3 SE that prints over the locations that the probe measures to level the bed. Follow these steps for the best results: Level your bed using the auto leveling feature. Print this test.…
General I wanted a simple and fast test pattern that got to testing the farthest corners of my bed early in the print and then had plenty of time for me to adjust the z offset so that my prints would stick all the way to the edge of my…
This bed level test measures 185mm x 185mm x 0.4mm thick. Check and adjust you bed level before printing actual parts. Using this to set your bed will ensure maximum adhesion. The thickness is 0.4mm, which will translate to 2 layers at…
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
Hi ! Fixing clip for the leveling wheel of the Elegoo Neptune 4 Pro 3D printer. It prevents the wheel from turning due to vibration. Over time, it also appears that the wheel is trying to turn even with the clamp. But this is a simple…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
I noticed that left front corner of the bed was by ca. 0.8mm lower than the right corner. Since the bed levels mechanically against the bottom of the printer, there is an easy solution. :) How do you figure it out if the bed is lower on…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Struggling with inconsistent first layers, wavy patterns, gaps between lines, nozzle digging into the build plate or leveling related error codes? Been told to adjust your z offset? Looked at your bed mesh and tried to adjust the bed? Not…
Made from a carefully arranged 65x52x198 mm block of interlinked rings supported together, this 3D print expands into a chainmail sheet measuring nearly 1.5 meters long and 6 centimeters wide. It was printed on a Prusa Core One. See it in…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
EDIT 18.11.24 Multi-Angle Baseplate Stabilizer: Some of you have asked for a variable one way solution for different angles. Santa came earlier this year. Here you go my fellow racers ;) Print Setup: 6 Walls + 4 Top & Bottom Layers 5-15%…
Simple but effective bed adhesion test for your 3D printer to verify if your bed leveling is correct. The model is shaped to be only one layer tall so you can peel it just right off and not waste material. The xy dimensions are calibrated…
Each square is 30x30mm an 0.2mm high. If this is to low for you. Feel free to scale it :)
Start small with 60mm then on to the larger squares. Easy and simple to use leveling square. in 60,100 and 120mm. These are to help dial in your z offset. I recommend your first set up on your z offset you use a folded piece of printer…
I just installed the Nylock bed leveling mod on my MK3S and wanted to take the guesswork out of turning the bed screws in accordance with directions from the Prusa Leveling Guide in Octoprint. Each mark on the protractor is 5 degrees, and…
Rice fields are harvested around September here in Spain. Once rice is harvested, it needs to be dried before storage or before processing it because we need to reduce humidity. Many years ago this was done by each farmer locally. They…
Even though the MK4 supposed to have perfect mesh bed levelling. Sometimes it's nice to test it for yourself. It should be printed in 0.2mm layer height.
Want to get even more accurate? Or see how accurate your 3x3 mesh is when printed in a 5x5 mesh? This is a 5x5 mesh you can use following the original instructions from the original model at the link below and its optimized to work with…
This is a simple bed leveling test to see if the whole bed is leveled and only prints in a few minutes. I would manually level my bed 4 times with the paper trick and then print this to double-check my leveling. I also used this print to…
Show off your super elite status, Zim would be proud! Only the very few reach the dizzy heights of Super Private. This is the perfect way to reward your victories over the scourge that plague our Super Earth. I once heard somebody say…
Leveling rooks designed specifically for the Kobra 3. These are complete remodels inspired by @FreshPrints "THE ROOK" on printables. https://www.printables.com/model/653220-the-rook-anycubic-kobra-2-kobra-2-pro-kobra-2-plus I have…
a test to help level your printer. resize to fit the bed and print in .2mm layer height,the print should be one layer.
Bed Level Correction Bed Level Correction 175x175mm for Prusa Mini+ Korekce podložky pro Průša Mini+
Just run the gcode from sd or octoprint Use feeler gauge or paper while adjusting knobs Category: 3D Printing Tests
The Model is inspired by the original Prusacaster made by Mikolas Zuza. But I draw it from scratch to end on my own. There are parts for both versions (3- & 5 screw version of the pickup, only the bottom core part is different) of the…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is a…
Test just a small section of the bed, or set these in various places on the bed. These are used for calibrating the z height setting. I use a piece of paper to get close, then print one of these to get final calibration done.
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is an…
Bed leveling/tramming+create mesh .gcode for Ender 3V2 by Teemo3D | PRINT3D GIFTS Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Notes: Bed leveling/tramming+create mesh .gcode for Ender…
Very simple test to print and manual adjust the level of your printbed (Adjust the offset) when you just installed your ABL or changed the nozzle. Adjust width and depth size in your slicer to match your buildplate but beware to not…
This is a Creality Ender 3 V3 SE / Ender 3 V3 KE bed leveling tester model designed to help you quickly check and fine-tune your printer’s build plate. By printing this file, you can easily verify if your bed is level, confirm your…
Here you have the calibration test for the Ender 3 Bed - 220 x 220 If you want more mods or information about your Ender 3, check it out on my personal website https://fixolab.dev/en/blog/creality-ender-3 Model available at Maker World…
Next level Racing Flight Simulator holders to rest the quest 3 controllers for those who use them
Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the layer adhesion by breaking it - A bridge, from 30mm length in the back to 35mm in the front -…
this a bed leveling print by pasa2004 on Thingerverse and its great and I use it always.
This is specifically designed to hold the round “Thlevel” humidity and temperature sensor shown in the pictures. If you're here, you probably have some. If not, you can find them easily on Amazon. Print it face down. No supports needed.…
Hallo zusammen, dies ist ein Leveltest für den FLSUN Q5. Der Außendurchmesser beträgt 180 mm. Dieser Test muss mit einer Layerhöhe von 0.2 mm gedruckt werden. Optimiert ist er für den Druck mit einer 0.4 mm Düse. Es werden 2 Schichten für…
This is for leveling your Blackstone griddle top with the smaller radius rubber feet on the 17" and 22" portable models. This is stepped in 1/8" increments. Also helpful to put on front feet to keep the grease rolling to the back. Print…
Hi! I ordered the amazing Revo micro and wanted to build it into my delta 3D printer. I designed a delta effector which has all of the features would want / loved from other designers. You can download it as well and I hope you have an…
100mm levelling blocks for levelling your x axis compatable with many 3D printers 0.2 LH
Bed Level Test / Z Offset Checker (First Layer) - Fits AnkerMake M5C Perfectly.
4/17/25 im removing the old version since it makes no sense to have a complicated mess when the new one is so simple 4/15/25 Iteration is always good, I've simplified it even more and have improved cooling. so this is the final I also…
Introducing the Multi-Function Level and Inclinometer Tool, a versatile instrument designed for leveling, angle measurement, and incline tracking. Compact and portable at 3” squared this tool provides all the functions of a larger level…
Edit: V2 was re-created from scratch with more polygons on curved edges. I haven't printed it but don't see any errors in the model in Cura. I've heard stories of the infamous Malevelon Creek, I joined the Helldivers after it was…
I printed bed level knobs and customize it by scaling it a little bit, so that it can fit 3mm hex nut
This is the file I used to print and test my robot is 75mm square, 1.6mm walls, with an X and a Y extending from the sides. I've uploaded a few additional versions. There's another version that's a 50mm square. Then, I've uploaded a 75mm…
This design is optimised to use in the sportsman 150g class, needs a flex frame printed in TPU while all the other files tagged as RIGID can be any material of your choice, we suggest PLA-ST for use in the full combat class. designed to…
I was got tired of guessing in error a few times which cost me a bunch more time. Printed with a filament change at 1mm Reading degrees; 3 lines closest to hole are 45 deg sequencing 0, 45 & 90 8 Hollow lines are in 10 deg increments,…
Check out my new Bed Levels ! This is a test print I made to help level my bed while it's printing. It is currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D,…
This print is difficult to print so it's a good way to set live Z and then fine bed level correction value. First you have to clean you PEI : 1 clean towel with water and dishwasher 2 clean towel with water 3 clean towel with a little bit…
This is a bed level test with a shortened print time, but the result is still the same. Thanks to the gap between the connections of the squares, the printing time is reduced, but this does not affect the result of the test.
You will need to download the bracket from the original model. The self leveling cup holder at https://www.printables.com/model/83109-self-leveling-cup-holder-for-tfk-stroller is great. It is quite large and several comments indicated the…
I made a bed test a few years ago, but it didn't work very well and was a little to simple. So I made this new and improved one that works much better. Right now it fits on a 210mm by 210mm bed, but you can scale it up or down to fit your…
This is for a m12 probe, I used it on the Ender 5 and you might have to bend the crimped belt fitting thing to the side to get the probe in or just cut a tiny bit off with your cutters.This will mount left of the hot-end,I had to mirror…
TEST Calibration Bed level Correction "compatible with all printers" Voir mon tutoriel ici => https://www.tiktok.com/@art3dchoix/video/7268707259251838240 Très simple tu agrandiras le fichier aux dimensions de ton plateau avec des…
(2021) Thingiverse seems to have destroyed / lost multiple additional stages of instructions and reference photos. I'm not sure it is worth recreating given the advances in automatic mesh bed leveling. Work-in-progress... would be…
inTinker's stringing calibration. 4-level.
Bed leveler for FlashForge Creator Pro 2 with dial indicator OR caliper. Does not work on Creator Pro. The 2 is a bit wider. Inspired by https://www.thingiverse.com/thing:1502857 Parts: M3 heatset inserts:…
As all owners of TronXY X5SA are aware, it can be very difficult to keep the bed level. The lead screws are attached directly to the shafts on the dual-Z steppers and with just a light touch one side can slide out of sync with the other.…
A 3 X 3 grid of 1 layer high squares for checking that the bed is level. First layer must be 0,15mm
Product description Level tool that can not only measures the horizontal and vertical lines but is able to determine angles of any object is something that evry handyman needs. If you often need a rough estimate of the angle of a…
I tried to make a version of a mechanical liquid level detector for the blind and visually impaired, which does not require batteries or any additional spare parts. I will be very glad to any comment from users A very simple device: When…
Qidi Tech X-Plus 3 bed leveling This is just a 280mmx280mm square 0.2mm high. You do not have to print the whole thing, this model is just useful for adjusting that Z offset. Printed in Black Polymaker ASA 0.2 layer height
A grid of 1 layer high squares for checking that the bed is level. First layer must be 0,15mm
Prevents your bed leveling wheels from being moved out of position unintentionally when you bump them while still allowing access when you do want to adjust them by reaching under the shields. Slide-on version just snaps around your bed…
