1 / 5
AOC Monitor Stand Upcycle to Tablet Stand — image 1
1 / 5

AOC Monitor Stand Upcycle to Tablet Stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cool monitor stand repurposed as a tablet stand

Rating
0 / 5
Likes
3
Downloads
11
Makes
0
Views
154
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This design aims to convert a quite fancy AOC monitor stand into a tablet and phone stand.

Shown on pictures are Galaxy Tab S7 (11") and Galaxy Tab A7 (10.4").

The mounting plate snaps-in onto the stand, making it easily removable.
Device holders are screwed onto the plate via 3 screw holes on either side, and can be exchanged for different variants (e.g. to adjust to different thickness of a device).
Additionally, a parametric stackable spacer is included to lock the stand in different heights, which is required due to the spring inside being perfectly adjusted to the weight of the original monitor, which will likely exceed whatever portable device we use it for. These spacers can 

This model is for AOC Monitor Stand, model Q37g10775010010sfh.
I can't guarantee that it will work for any other models, but report your successes in makes.

Features

  • Removable plate, using the snap-in lock of the stand

  • Swappable device hooks, allowing those to be exchanged at any time

    • Parametric hook design included (Fusion)

    • Or design your own! See drawing

  • Print difficulty: ★★★★☆ (Easy)

    • No supports required

    • Some models may have smaller build plate contact area

    • Models may require bridging

Make

BoM

Item

Detail

1 - 3 x M3 x 6mm screw

Used to attach device hooks to the mounting plate.

1 - 3 x M3 hex nut

1 x AOC Monitor Stand

Q37g10775010010sfh

Parts

Model

Description

Mounting Plate

Snaps onto the monitor stand

Device Hook

Joined onto the plate, holds devices, print two

Rail Spacer

Stackable stopper to lower the stand height, print as many as needed (3 x 30mm recommended)

Print

Option

Setting

Note

Material

PLA, PETG

None of the parts undergo much stress

Supports

None

Infill

15% Grid

Perimeters

2

Layers

.20mm

Profile

Balanced

Drawing

Mounting Plate

Do you want to design your own hooks or a holder? These are the mounting rails:

Tags