AOC Monitor Stand Upcycle to Tablet Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cool monitor stand repurposed as a tablet stand
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design aims to convert a quite fancy AOC monitor stand into a tablet and phone stand.
Shown on pictures are Galaxy Tab S7 (11") and Galaxy Tab A7 (10.4").
The mounting plate snaps-in onto the stand, making it easily removable.
Device holders are screwed onto the plate via 3 screw holes on either side, and can be exchanged for different variants (e.g. to adjust to different thickness of a device).
Additionally, a parametric stackable spacer is included to lock the stand in different heights, which is required due to the spring inside being perfectly adjusted to the weight of the original monitor, which will likely exceed whatever portable device we use it for. These spacers can
This model is for AOC Monitor Stand, model Q37g10775010010sfh. |
Features
Removable plate, using the snap-in lock of the stand
Swappable device hooks, allowing those to be exchanged at any time
Parametric hook design included (Fusion)
Or design your own! See drawing
Print difficulty: ★★★★☆ (Easy)
No supports required
Some models may have smaller build plate contact area
Models may require bridging
Make
BoM
Item | Detail |
|---|---|
1 - 3 x M3 x 6mm screw | Used to attach device hooks to the mounting plate. |
1 - 3 x M3 hex nut | |
1 x AOC Monitor Stand | Q37g10775010010sfh |
Parts
Model | Description |
|---|---|
Mounting Plate | Snaps onto the monitor stand |
Device Hook | Joined onto the plate, holds devices, print two |
Rail Spacer | Stackable stopper to lower the stand height, print as many as needed (3 x 30mm recommended) |
Option | Setting | Note |
|---|---|---|
Material | PLA, PETG | None of the parts undergo much stress |
Supports | None | |
Infill | 15% Grid | |
Perimeters | 2 | |
Layers | .20mm | |
Profile | Balanced |
Drawing
Mounting Plate
Do you want to design your own hooks or a holder? These are the mounting rails:
