1 / 6
Upcycled Small Parts Organizer - New Drawers and Inserts — image 1
1 / 6

Upcycled Small Parts Organizer - New Drawers and Inserts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Make an old drawer organizer (more) useful again

Rating
0 / 5
Likes
544
Downloads
564
Makes
0
Views
9,714
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

These small drawer organizers used to be very popular… but can be had for very cheap to free nowadays, especially if drawers are missing or broken.

I found this one with a bunch of drawers missing so decided to (re)make it better than it ever was.  These used to be very common and could be found in every garage and workshop and I believe the drawer size was also fairly standardized (at least for most of them).

A great bonus feature of this design is the inserts can be removed individually, at any time for access to parts.  As well as easily rearrangeable. 

The parts (drawers, handles and inserts) take a while to print but use very little material.
Recommended print settings:
PLA
Walls - 3
Top - 4
Bottom - 3
Infill - 20% cubic
Layer - 0.28 recommended for faster printing, but 0.2 will also work

Start with the Drawer and Drawer Pulls.  Then print the inserts you need as you need them.
I recommend filling out an entire drawer with inserts at one time so they don't slide or move around.

Glue the drawer pull to the (front) face of the drawer just below the label recess.  Use whatever glue works for you, but this is a great use case for PLA Gloop.

Double check an existing drawer to these dimensions.
Original drawer 139mm long x 54mm wide x 37mm deep (measured from the top/outside)

Like this build?  Buy me a coffee or beer with your tip using the links below.
Thanks :)
https://paypal.me/cdsmakestuff
or
https://www.venmo.com/u/cdsmakestuff

Tags