Upcycled Bike Pedal Wall Hook (+HSW Insert)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upcycle broken pedals into sturdy wall hooks—great for helmets, jackets, or bags. Holds ~4.5 kg. 1-hour print, ~20 g
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 14
- Makes
- 1
- Views
- 177
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
After summer, I found a few old bike pedals in the my toolbox. Not good for biking, but the body is still strong, anti-slip, ready to carry some weight. With a quick clean, they shine again and hold gear reliably.
Included files:
- Default 50° Pedal Mount
- Horizontal Pedal Mount
- HSW Compatible Pedal Insert for Honeycomb Storage Wall
Recommended settings:
- 0.2 mm layer height
- 20% infill (higher if you want more strength)
- 4+ walls (depending on load)
- No supports needed
- Adaptive layers & ironing optional
I did a quick load test, reached 4.5kg load before breaking for 20% infill and 3mm walls, Silk PLA+. For heavier items, increase walls or infill.
Assembly note: Bike Pedals uses Counterclockwise direction to screw in.
Note about tolerances: My printer often struggles with tolerances, so I designed the model to be more loose. As you screw in the pedal fully, it is usually tight. If not, scale the model down to 99.5% and you should get a nice tight fit.