Upcycled Bike Pedal Wall Hook (+HSW Insert)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upcycle broken pedals into sturdy wall hooks—great for helmets, jackets, or bags. Holds ~4.5 kg. 1-hour print, ~20 g
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 177
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
After summer, I found a few old bike pedals in the my toolbox. Not good for biking, but the body is still strong, anti-slip, ready to carry some weight. With a quick clean, they shine again and hold gear reliably.
Included files:
- Default 50° Pedal Mount
- Horizontal Pedal Mount
- HSW Compatible Pedal Insert for Honeycomb Storage Wall
Recommended settings:
- 0.2 mm layer height
- 20% infill (higher if you want more strength)
- 4+ walls (depending on load)
- No supports needed
- Adaptive layers & ironing optional
I did a quick load test, reached 4.5kg load before breaking for 20% infill and 3mm walls, Silk PLA+. For heavier items, increase walls or infill.
Assembly note: Bike Pedals uses Counterclockwise direction to screw in.
Note about tolerances: My printer often struggles with tolerances, so I designed the model to be more loose. As you screw in the pedal fully, it is usually tight. If not, scale the model down to 99.5% and you should get a nice tight fit.