UPDATED Garden tool holder rack for garage or shop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garden tool holder rack for garage or shop with expanded nut hole and amazon link to nuts.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 2040
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE:
I expanded the I expanded the hole for the nut to fit amazon ordered nuts. Also added an expanded base hole (40mm) for my larger shovel handle on one of the files I added.
Working Nuts for this model: https://www.amazon.com/dp/B07RR39TGW?ref=ppx_pop_mob_ap_share&th=1
This is the screw I used for the all screws but the lever arm: https://www.lowes.com/pd/Hillman-4mm-0-7-x-16mm-Phillips-Drive-Machine-Screws-12-Count/999994834
Lever arm screws (longer): https://www.lowes.com/pd/Hillman-4mm-0-7-x-35mm-Phillips-Drive-Machine-Screws-10-Count/999994904
------------------------------------------------------------------
This is the STL files for the awesome Garden tool holder by @Regis. I needed just the STLs for my slicer and the originals were in PrusaSlicer project files. I converted them for myself and decided to link them here for others that might need the STLs too.