Impossible Dovetail Box - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This impossible dovetail should be impossible to print with only one extruder. In this remix I added a logo.
- Ocena
- 4,667 / 5
- Polubienia
- 32
- Pobrania
- 68
- Wydruki
- 2
- Wyświetlenia
- 847
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE:
This is the second version of this remix. I removed the filament change part of the first remix to follow the contest guidelines. I replaced it by adding a seperat part to print which gets pushed in from the inside and shows the logo on the top. All parts of the original model had to be altered.
Slicing:
No supports are needed and 0.2mm layer hight is fine. I use three perimeters and 15% cubic infill. I added ironing for the top most layer of the inlay part.
Optional:
If you want you can add magnets to hold top and bottom in position. There are holes in the model for six round 10mm x 2mm magnets. If you live in the USA use 3/8 inch by 1/16 inch magnets.