Impossible Dovetail Box - Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This impossible dovetail should be impossible to print with only one extruder. In this remix I added a logo.
- Rating
- 4.667 / 5
- Likes
- 32
- Downloads
- 68
- Makes
- 2
- Views
- 847
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE:
This is the second version of this remix. I removed the filament change part of the first remix to follow the contest guidelines. I replaced it by adding a seperat part to print which gets pushed in from the inside and shows the logo on the top. All parts of the original model had to be altered.
Slicing:
No supports are needed and 0.2mm layer hight is fine. I use three perimeters and 15% cubic infill. I added ironing for the top most layer of the inlay part.
Optional:
If you want you can add magnets to hold top and bottom in position. There are holes in the model for six round 10mm x 2mm magnets. If you live in the USA use 3/8 inch by 1/16 inch magnets.