1 / 4
EMT J-Box Nema 14-50 Electric Car Cord Hanger — zdjęcie 1
1 / 4

EMT J-Box Nema 14-50 Electric Car Cord Hanger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cord hanger meant for a double gang size EMT box with corner cover plate screws -- fits 3 wraps of 25mm cord.

Ocena
0 / 5
Polubienia
5
Pobrania
32
Wydruki
0
Wyświetlenia
202
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution

Cord hanger for whatever you want that fits on a standard double EMT box with corner screws (not the traditional double gang).

Use 2 screws and nuts (i used M5s, but traditional ?8-32? screws will work too) to mount the hanger to the cover plate, then 2 more screws to mount the cover plate + hanger + receptacle to the box.  See a photo or two.  Youll figure it out. :)

 

The mounting tabs are offset a bit to account for some thickness of the cover plate – use supports and CAREFULLY shave them off after with a knife or something.

I also used supports on the cord hanger part thing, idk what to call it – maybe not needed, but cheap insurance on a longer print.

 

Included are 2 versions, both the same mount and shape, just the shape of the ‘triangle’ leg is different on the rounded.  Both were similar print times for me (3:45 vs 3:30, so not much time savings).

 

Hang a cord from it. Hang a hose from it.  Use it for rope.  Idc.

okay, dont hang a water hose over an electrical box, thats dumb.

Tagi