EMT J-Box Nema 14-50 Electric Car Cord Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cord hanger meant for a double gang size EMT box with corner cover plate screws -- fits 3 wraps of 25mm cord.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
Cord hanger for whatever you want that fits on a standard double EMT box with corner screws (not the traditional double gang).
Use 2 screws and nuts (i used M5s, but traditional ?8-32? screws will work too) to mount the hanger to the cover plate, then 2 more screws to mount the cover plate + hanger + receptacle to the box. See a photo or two. Youll figure it out. :)
The mounting tabs are offset a bit to account for some thickness of the cover plate – use supports and CAREFULLY shave them off after with a knife or something.
I also used supports on the cord hanger part thing, idk what to call it – maybe not needed, but cheap insurance on a longer print.
Included are 2 versions, both the same mount and shape, just the shape of the ‘triangle’ leg is different on the rounded. Both were similar print times for me (3:45 vs 3:30, so not much time savings).
Hang a cord from it. Hang a hose from it. Use it for rope. Idc.
okay, dont hang a water hose over an electrical box, thats dumb.