AGM-65 Maverick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1:10 Scale AGM-65 Maverick Air to Ground Missile
- Ocena
- 4 / 5
- Polubienia
- 27
- Pobrania
- 246
- Wydruki
- 1
- Wyświetlenia
- 795
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I was inspired by RexiLabs on MakerWorld who is designing all sorts of 3D printed scale missiles but hasn't made a Maverick yet. This is a 1:10 scale recreation of the AGM-65 I designed based on images I found online. The 3mf file contains all the parts assembled and each part is labeled by color for the standard grey color scheme. The parts should be held together with friction for the most part but might require some glue to stay attached.
I printed all the parts using PLA (except the nose since I didn't have any clear PLA) at a 0.2mm layer height and 15% infill but just about any material and settings should work fine!