1 / 2
Beam Clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
I wanted to attach a Wyze Pan v3 to the beam in my kitchen so I could watch my bird feeder on the window.
I built this with machining tolerances in mind and had some issues with getting the screw to run smoothly so I would recommend printing the screw at around 95%.
I printed every part at 20% infill and 2 perimeters.
The screw should be printed horizontally if you want it to not break.
I’ve included the Solidworks file to adjust to fit your beam, I recommend making the clearance for the beam about .5 inches.