Beam Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a clamp I built to attach a camera to a beam in my house, I didn’t want to put any holes in the beam so I built
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
I wanted to attach a Wyze Pan v3 to the beam in my kitchen so I could watch my bird feeder on the window.
I built this with machining tolerances in mind and had some issues with getting the screw to run smoothly so I would recommend printing the screw at around 95%.
I printed every part at 20% infill and 2 perimeters.
The screw should be printed horizontally if you want it to not break.
I’ve included the Solidworks file to adjust to fit your beam, I recommend making the clearance for the beam about .5 inches.